THE ACCURATERELOADING.COM FORUMS


Moderators: Mark
Go
New
Find
Notify
Tools
Reply
  
trimming cases
 Login/Join
 
One of Us
posted
Just want to know what happens when you trim your cases down from 1.912 to 1.812. does this affect accuracy or cause pressure changes. I already posted this but forgot where,sorry.
 
Posts: 43 | Registered: 12 February 2005Reply With Quote
One of Us
Picture of woods
posted Hide Post
You posted it at Reloaders Nest under Single Shot Rifles.


____________________________________
There are those who would misteach us that to stick in a rut is consistency - and a virtue, and that to climb out of the rut is inconsistency - and a vice.
- Mark Twain |

Chinese Proverb: When someone shares something of value with you and you benefit from it, you have a moral obligation to share it with others.

___________________________________
 
Posts: 2750 | Location: Houston, Tx | Registered: 17 January 2005Reply With Quote
one of us
posted Hide Post
At any rate there is no problem with doing that. If one trims considerably short then in time he might erode the throat in his rifle,but again thats probably mostly therory..

Reloading and gun stuff in general is over loaded with BS and therory that has no basis other than someone deemed it made since, when in fact it didn't...but such crap is constantly perpetuated by a little knowledge is a dangerous thing folks.


Ray Atkinson
Atkinson Hunting Adventures
10 Ward Lane,
Filer, Idaho, 83328
208-731-4120

rayatkinsonhunting@gmail.com
 
Posts: 42210 | Location: Twin Falls, Idaho | Registered: 04 June 2000Reply With Quote
One of Us
posted Hide Post
Thanks Atkinson, I needed that info. Like the rest of your thread also. Already bought 200 new cases just cuz.
 
Posts: 43 | Registered: 12 February 2005Reply With Quote
  Powered by Social Strata  
 


Copyright December 1997-2023 Accuratereloading.com


Visit our on-line store for AR Memorabilia