THE ACCURATERELOADING.COM FORUMS


Moderators: Mark
Go
New
Find
Notify
Tools
Reply
  
first 5 rounds done, THANKS TO ALL
 Login/Join
 
One of Us
posted
Thanks to everyone that helped. I know its only 5 rounds, but im finally starting to get the process down pretty well. They all fit in the chamber and cycle from the magazine flawlessly. Let me know if you see anything wrong just by the pics, but I took my time, and had fun. So here are the first 5
Cool
 
Posts: 29 | Location: Bay Area, CA | Registered: 06 February 2006Reply With Quote
One of Us
posted Hide Post
Sweet. What caliber is that?
 
Posts: 5184 | Location: Michigan | Registered: 06 August 2005Reply With Quote
One of Us
posted Hide Post
A guess 358 win 200 Gr. Sierra?
 
Posts: 1679 | Location: Renton, WA. | Registered: 16 December 2005Reply With Quote
One of Us
posted Hide Post
got the bullet right


.35 rem. clap
 
Posts: 29 | Location: Bay Area, CA | Registered: 06 February 2006Reply With Quote
One of Us
Picture of vapodog
posted Hide Post
It looks like you're set for five years of bambi hunting!!!!


///////////////////////////////////////////////////////////////////////////
"Socialism is a philosophy of failure, the creed of ignorance, and the gospel of envy, its inherent virtue is the equal sharing of misery."
Winston Churchill
 
Posts: 28849 | Location: western Nebraska | Registered: 27 May 2003Reply With Quote
One of Us
Picture of STINGER
posted Hide Post
well they certainly look consistent, at least to my old eyes.

vapo dog, i hope your opptimism holds true. Wink


PLEASE EXCUSE CAPS, HANDICAPPED TYPIST.

"THE" THREAD KILLER

IT'S OK......I'VE STARTED UP MY MEDS AGAIN. THEY SHOULD TAKE EFFECT IN ABOUT A WEEK. (STACI-2006)

HAPPY TRAILS

HANDLOADS ARE LIKE UNDERWEAR....BE CAREFUL WHO YOU SWAP WITH.

BILL
 
Posts: 479 | Location: MINOT, NORTH DAKOTA | Registered: 24 January 2005Reply With Quote
One of Us
posted Hide Post
Congratulations..!!!!
You're hooked. Welcome to a lifetime of acquiring "doo-dads" and tweaking the loads. There sure are worse ways to spend one's time.
You do know of course, bullet casting is just right around the corner for you...??!!
Cheers,
Don
 
Posts: 953 | Location: Florida | Registered: 17 March 2005Reply With Quote
one of us
posted Hide Post
Half a season worth down in Georgia.




If yuro'e corseseyd and dsyelixc can you siltl raed oaky?

 
Posts: 9647 | Location: Yankeetown, FL | Registered: 31 August 2002Reply With Quote
One of Us
posted Hide Post
Are you crimping the case mouth into the bullet cannelure? It looks like most of the cannelure is exposed. If so, you might want to seat the bullet just a tad deeper so the case mouth lines up with the middle or slightly above the middle of the cannelure.
 
Posts: 88 | Registered: 21 January 2005Reply With Quote
one of us
posted Hide Post
Hey P.T., Congratulations.

What type and amount of Powder to you have in them?
---

I grew up dragging Deer that became Venison needing processing because of the 35Rem. Just an outstanding Cartridge when used properly.

And those RNs make me visualize some woods and swamp Stands that I've enjoyed over the years.
 
Posts: 9920 | Location: Carolinas, USA | Registered: 22 April 2001Reply With Quote
one of us
Picture of Fjold
posted Hide Post
All of the cases have the dreaded red stripe on them. That means that you weren't holding your mouth right when the framistat was detickling the primer shoulders.


Frank



"I don't know what there is about buffalo that frightens me so.....He looks like he hates you personally. He looks like you owe him money."
- Robert Ruark, Horn of the Hunter, 1953

NRA Life, SAF Life, CRPA Life, DRSS lite

 
Posts: 12754 | Location: Kentucky, USA | Registered: 30 December 2002Reply With Quote
One of Us
posted Hide Post
quote:
Originally posted by Fjold:
All of the cases have the dreaded red stripe on them. That means that you weren't holding your mouth right when the framistat was detickling the primer shoulders.


haha. You should see the weird red stripes on the next 5. Almost look like a two.

As for depth, those are around (about .01 larger than) the min-OAL for these loads. And i am crimping with the Lee Factory Crimp Die, so its not too much of a worry. I intend to seat the next 5 just slightly lower.

the powder is H4895 w/ sierra 200gr RN bullets.
 
Posts: 29 | Location: Bay Area, CA | Registered: 06 February 2006Reply With Quote
  Powered by Social Strata  
 


Copyright December 1997-2023 Accuratereloading.com


Visit our on-line store for AR Memorabilia