Does anyone have suggestions for handloads in 7MM RUM? Also looking for recommendations on a press and dies.

I have the best luck with h-1000 and imr7828 with bullets from 140gr to 160 gr.For a press you can't go wrong with a rockchucker.For dies I use rcbs but forster and redding are also good products.

http://stevespages.com/284_27.html for reloading information.

For reloading equipment...RCBS...

H1000 & Retumbo. I use RCBS dies also.
http://www.hodgdon.com/data/rifle/7mmremulmag.php
http://www.hodgdon.com/data/retumbo/7mmremultramag_r.php
http://www.reloadersnest.com/frontpage.asp?CaliberID=214

try these loads:

1. 154 gr. interbond

rl 25 92 grains

215m primer

c.o.l. 3.590

2. 139 gr. sst

rl 22 87 grains

215m primer

c.o.l. 3.560

3. 160 gr. partition

rl 22 85 grains

215m primer

c.o.l. 3.645



all these loads shoot inside a dime at 100 yards.

sorry this post was for "rescurat"

velocities?