Go | New | Find | Notify | Tools | Reply |
One of Us |
Friend recently purchased near new Colt Detective in 32Long and searching for source for brass to reload. Anyone know of a source for such brass?? Thanks, martin | ||
|
one of us |
Which 32 Long cartridge is it chambered for? 32 Colt Long CL .787 OAL 1.240 32 S&W Long CL .910 OAL 1.256 32 Long CL .917 OAL 1.202 32 Colt New Police CL .910 OAL 1.245 Note that there are 2 different groove diameters, depending on if it was intended for inside (late) or outside (early) lubed bullets If you need to, you could probably trim back 32 H&R brass (CL 1.067) or 327 Fed brass (CL 1.188) | |||
|
One of Us |
Tailgunner, Good information, thanks and will pass on to owner of the Colt Detective and see just which one he actually has. martin | |||
|
One of Us |
My guess is that it is likely chambered for .32 Colt New Police. If so, you can use .32 S&W brass in that chambering. The major difference is that the S&W Long was loaded with a RN bullet, and the .32 Colt NP was loaded with a flat-nosed bullet. I have a Colt Officer's Model Match in .32 Colt NP & have used the S&W Long in it with no problems. | |||
|
One of Us |
Alberta Canuck, OK, also good info. By the way, check your mail either today or tomorrow, not the electronic type, but the "real" mail. martin | |||
|
Powered by Social Strata |
Please Wait. Your request is being processed... |
Visit our on-line store for AR Memorabilia