The Accurate Reloading Forums
6 m ppc

This topic can be found at:
https://forums.accuratereloading.com/eve/forums/a/tpc/f/2511043/m/6621025121

01 December 2009, 01:52
neil ward
6 m ppc
hi all new to site quick question any loads for a mate. 6m ppc reloader 15 and 70 gr blitsking cheers......
01 December 2009, 15:16
mho
Neil, I don't have access to my reference data, so I can't provide specific input on the combination you look for.

A general input would be that RL15 is on the slow side for the 6mm PPC case. The standard powders for that cartridge is something like VV N130 and (in particular) N133.

Try to vist www.6mmbr.com, I believe they have an article on the 6mm PPC. Their articles usually contain suggestions for loads.

- mike


*********************
The rifle is a noble weapon... It entices its bearer into primeval forests, into mountains and deserts untenanted by man. - Horace Kephart
01 December 2009, 18:26
butchloc
if it does you any good - my load is 28.5 gr of H335 and the 70 grain bullet
02 December 2009, 00:30
mho
Here is a link to the article I referred to above:

http://www.6mmbr.com/6PPC.html

- mike


*********************
The rifle is a noble weapon... It entices its bearer into primeval forests, into mountains and deserts untenanted by man. - Horace Kephart
02 December 2009, 01:09
neil ward
Thanks lads i will give your info to my mate .Many thanks for your help... Neil
02 December 2009, 01:12
ramrod340
Never tried anything as slow as RL15 ended up with H322 because I could get it easier than N133.


As usual just my $.02
Paul K