THE ACCURATERELOADING.COM FORUMS


Moderators: Mark
Go
New
Find
Notify
Tools
Reply
  
How Many Grains of water in 7 Ultra
 Login/Join
 
one of us
posted
I have a new wildcat that holds 108 gr. water and know that the STW holds 98, does anyone have info on how much the 7 Ultra holds?

[ 11-14-2002, 17:17: Message edited by: Tim in TN ]
 
Posts: 370 | Location: Memphis, TN. U.S.A. | Registered: 24 July 2000Reply With Quote
<Delta Hunter>
posted
Hey Tim, I don't have a clue, but it's good to see you posting again. You been doing much shooting up at MSSA lately?
 
Reply With Quote
one of us
posted Hide Post
Delta Hunter, I`ve been kinda busy but I am going real soon to sight in a couple new custom rifles. Nice to hear from you. Have you been going lately?
 
Posts: 370 | Location: Memphis, TN. U.S.A. | Registered: 24 July 2000Reply With Quote
one of us
posted Hide Post
The Swift manual says "in the neighborhood of 113 grains".
Jeff
 
Posts: 236 | Location: Oregon | Registered: 16 October 2001Reply With Quote
<Delta Hunter>
posted
Hey Tim, no, I haven't been out there either in a while. I've just had too many other things going on, but I hope to soon. What kind of new custom rifles you got? You know one of these days I need to get me a custom rig and I'm thinking about doing it next year. I may need your input if you don't mind.
 
Reply With Quote
one of us
posted Hide Post
I measured one of my 300 RUM cases and it held 116.3 but it does have a bigger neck.
 
Posts: 920 | Location: Mukilteo, WA | Registered: 29 November 2001Reply With Quote
one of us
posted Hide Post
Thanks jsr, Jon A, my case holds 108 instead of the 118 that I posted earlier. Delta Hunter, I have 2 reamers on the 338 RUM, one necked to 7MM and the other to 30 cal., I had the 7MM/338RUM done along with another reamer I had made for the .264 Win Mag., lengthened throat for seating the Sierra 140 to the neck shoulder junction with min. Sammi. specs and a 1 1/2* leade (angle of rifling where they begin @ chamber). They both are on Remington 700`s with 26" Krieger barrels, the 7MM/338 is on a Sendero taper with McMillan stock, Jewel trigger, and the .264 is a #5 with flutes, in a factory grey/black laminate with 40x trigger.
 
Posts: 370 | Location: Memphis, TN. U.S.A. | Registered: 24 July 2000Reply With Quote
  Powered by Social Strata  
 


Copyright December 1997-2023 Accuratereloading.com


Visit our on-line store for AR Memorabilia