THE ACCURATERELOADING.COM FORUMS


Moderators: Mark
Go
New
Find
Notify
Tools
Reply
  
Need some help please
 Login/Join
 
One of Us
posted
Can some one with quickload or some other programs tell me what they say for a 8mm mauser with a 150 gr. bullet with 33.0 grs. of H-322 powder.Thank You.Good Luck
 
Posts: 1371 | Location: Plains,TEXAS | Registered: 14 January 2008Reply With Quote
one of us
posted Hide Post
plains.....

WTF - Over?

Doesn't even register on the Richter Scale.

I woulda liked to have some more specifics like bbl. length & which bullet but with an imaginary 22" bbl. length, a Speer .323" 150 gr. SP #2400 & cartridge AOL of 2.925" (seats the bullet the full length of the case neck), 33.0 grs. of H-322 fills the case 65.4% (just at 2/3rds) w/20919 psi and is supposed to spit the projectile outa the imaginary barrel at 2076 fps.

Good Luck


Cheers,

Number 10
 
Posts: 3433 | Location: Frankfurt, Germany | Registered: 23 December 2004Reply With Quote
One of Us
Picture of James Kain
posted Hide Post
yuck popcorn
Damn I like this guy! Good sense of humor!


Disabled Vet(non-combat) - US Army
NRA LIFE MEMBER
Hunter, trapper, machinest, gamer, angler, and all around do it your selfer.
Build my own CNC router from scratch. I installed the hight wrong. My hight moves but the rails blocks 3/4 of the hight.....
 
Posts: 934 | Location: North Anson Maine USA | Registered: 27 October 2008Reply With Quote
One of Us
posted Hide Post
Thanks just what i needed and funny also.really it is a reduced load for a case with a shotgun primer installed.shot it 16 times yesterday and it worked.Thanks Good Luck
 
Posts: 1371 | Location: Plains,TEXAS | Registered: 14 January 2008Reply With Quote
One of Us
Picture of Roll-Crimp
posted Hide Post
quote:
Originally posted by plainsman456:
Thanks just what i needed and funny also.really it is a reduced load for a case with a shotgun primer installed.shot it 16 times yesterday and it worked.Thanks Good Luck

bewildered Huh? I must be missing something here? Confused
 
Posts: 54 | Registered: 24 February 2009Reply With Quote
One of Us
posted Hide Post
Well with primers hard to find for rifles for some people i machined a piece of 8mm brass for a 209 primer took a while to get the right fit but so far it works. was just looking at what pressures the shotshell primer might be good.the wind has beed blowing so hard here with sand so nothing to do.Good Luck
 
Posts: 1371 | Location: Plains,TEXAS | Registered: 14 January 2008Reply With Quote
One of Us
Picture of Rusty
posted Hide Post
Years ago, in Odessa, when the wind and sand blew that hard, we just tossed the bullets up in the air and tried to get a good group that way! Eeker Big Grin


Rusty
We Band of Brothers!
DRSS, NRA & SCI Life Member

"I am rejoiced at my fate. Do not be uneasy about me, for I am with my friends."
----- David Crockett in his last letter (to his children), January 9th, 1836
"I will never forsake Texas and her cause. I am her son." ----- Jose Antonio Navarro, from Mexican Prison in 1841
"for I have sworn upon the altar of god eternal hostility against every form of tyranny over the mind of man." Thomas Jefferson
Declaration of Arbroath April 6, 1320-“. . .It is not for glory, nor riches, nor honours that we are fighting, but for freedom - for that alone, which no honest man gives up but with life itself.”
 
Posts: 9797 | Location: Missouri City, Texas | Registered: 21 June 2000Reply With Quote
One of Us
posted Hide Post
I heard that.Good Luck
 
Posts: 1371 | Location: Plains,TEXAS | Registered: 14 January 2008Reply With Quote
  Powered by Social Strata  
 


Copyright December 1997-2023 Accuratereloading.com


Visit our on-line store for AR Memorabilia