THE ACCURATERELOADING.COM FORUMS


Moderators: Mark
Go
New
Find
Notify
Tools
Reply
  
Re using brass?
 Login/Join
 
One of Us
posted
How many times can I reload my 300 Winchester magnum brass? I have not kept records, but most of it has been loaded 4 or 5 times now.
 
Posts: 63 | Registered: 28 January 2011Reply With Quote
one of us
posted Hide Post
I get about 5 from my 300wm I take a wire with a sharp bend in it run it down into the case and feel for a ring just about the belt.

If the case is thining there you well feel a ring starting as the brass thins. When I start feeling a ring the cases go into the scrap bucket.
 
Posts: 19432 | Location: wis | Registered: 21 April 2001Reply With Quote
One of Us
posted Hide Post
If you're resizing your brass correctly, you'll start getting neck splits before anything else. When I get about 10% failure in the batch, I pitch it and start with another batch.


Aim for the exit hole
 
Posts: 4348 | Location: middle tenn | Registered: 09 December 2009Reply With Quote
one of us
Picture of fredj338
posted Hide Post
With any belted case, it's about setting your dies up properly. If you F.L. resize, most are going to get you 5x. Set them up to partial F.L. size & sset proper headspace, yo ucan get 8-10.


LIFE IS NOT A SPECTATOR'S SPORT!
 
Posts: 7752 | Location: kalif.,usa | Registered: 08 March 2001Reply With Quote
  Powered by Social Strata  
 


Copyright December 1997-2023 Accuratereloading.com


Visit our on-line store for AR Memorabilia