24 March 2008, 13:16
Johnny foreignerCase fill % and Powder recomendations in 243
I've started reloading my 243 for heavy 95-108 grain heads and the issue I have is powder capacity of the case. According to "Quickload" VV160 gives me about 106% for the 95s and 101% for the 105s-108s. AA4350 is at about 85-90% for these heads.
Is there an ideal % of fill for the case?
If possible, a recommended powder for the 243 for 95s - 108 grain heads???
24 March 2008, 13:36
seafire2J.F.
I am not sure about powder availability in GB..stateside, I have found the most versatile powder for the 243, particularly with heavier bullets, is H 414.. or W 760.. essentially the same powder..
any of the 4350s are good, as is RL 19...
but my preference goes to the above H 414...
It gives me 3250 fps out of a 243, with a 105 A Max...the load is a little hot at 44 grains.. ( so work up if you try it) but that is only a grain more than listed in the Hodgdon # 26 manual...and it proved to be more accurate in each of my 243s...I use the same charge with 95 grain ballistic tips up to 107 grain Sierra HP Match bullets..