375 H&H Barnes data

The Accurate Reloading Forums

375 H&H Barnes data

This topic can be found at:
https://forums.accuratereloading.com/eve/forums/a/tpc/f/2511043/m/63610236

15 February 2003, 05:53

Marsh Mule

375 H&H Barnes data

I got 7 boxes of Barnes X's from a fellow that had been shooting one of the wildcats, a 375 JDR or something like that. I think the weights are 210gr, 225gr, 235gr and 250gr. If someone out there has a Barnes manual, I would really appreciate if you could help me with their data for these bullets. You can send through E-mail on my profile if you'd rather not post it here.
Thanks-a-bunch,
[Smile]

15 February 2003, 06:08

DB Bill

What kind of data do you want?

15 February 2003, 06:20

Marsh Mule

Bill;
Some reloading data please. I can't find any on these "Light" bullets. [Frown]

Thanks,
MM

15 February 2003, 08:49

<Mike Dettorre>

Marsh,

What powders are u currently using...

[ 02-14-2003, 23:52: Message edited by: Mike Dettorre ]

15 February 2003, 12:01

Marsh Mule

Sorry for not getting back to you sooner, I had to run some errands but I'll list the powders I currently have on hand;
IMR 4350 and IMR 4895-- Reloader 19 and 22 and I'm thinking of getting some IMR 4064 & R-15
Any Powder suggestions you've had good results with are welcome also.
Thanks.

15 February 2003, 16:31

ricciardelli

http://stevespages.com/page8c.htm

[ 02-16-2003, 21:17: Message edited by: ricciardelli ]

16 February 2003, 04:53

Marsh Mule

Steve
Thank you, the link you posted wouldn't work for me, but I followed the one in you signature and navigated my way to the data. Not nit-picking here but, Sure wished you had velocities listed also.
Like they say "Beggers can't be choosers!"
Again thanks,
MM

17 February 2003, 06:11

Frank Martinez

I sent you a couple of pages from the new manual
Frank

17 February 2003, 06:19

ricciardelli

quote:
Originally posted by Marsh Mule:
Steve
Thank you, the link you posted wouldn't work for me, but I followed the one in you signature and navigated my way to the data. Not nit-picking here but, Sure wished you had velocities listed also.
Like they say "Beggers can't be choosers!"
Again thanks,
MM

The link is fixed (I added an "l" to the end of it...sorry).

As for showing velocities and pressures in my reloading data pages, I don't do it for a very good reason. Too many variables...What I obtained from my firearms is not what you will get from yours...if you really are interested in the velocities I have obtained, then I have listed some of the calibers I load in Table #1.