THE ACCURATERELOADING.COM FORUMS


Moderators: Mark
Go
New
Find
Notify
Tools
Reply
  
Accurate Arms 2700 vs H-414
 Login/Join
 
one of us
Picture of 41rem
posted
I'm looking to work-up some ball powder loads for my 270 win. with the 130 gr. bullet. I have used WW760 and am not to impressed with all the carbon fouling I'm getting. any users out there??......41
 
Posts: 54 | Location: Hurricane Ridge, Wa. | Registered: 03 November 2003Reply With Quote
one of us
Picture of hivelosity
posted Hide Post
i tried the ww760 a few years ago and did not find any accurate loads for a rem 7400, imagine that..
i load 130 nosler bt aa 2700. cci250 primers. good all around accurate load, very devistating on deer and alot of meat damage.
I tried the H414 130sp hornady 9 1/2 rem primers not a bad load either. didnt do as much damage as the nosler bt's
also loaded some H380 and 130 and 140 gr hornadays with similar results.
Best load is 140gr hpbt hornaday cci250 primers and imr 4064 loaded to 2700f/s there abouts.
one heck of a deer killin load.
I grew up in Range WVa.
 
Posts: 2134 | Location: Ohio | Registered: 26 June 2000Reply With Quote
one of us
posted Hide Post
I have used AA2700 with a 125 grain hp in the 30-06. These were full-charge loads. I don't have a chronograph, but they were screamers. Only problem was the groups I shot had bad fliers. Could be my gun. I'm using a Ruger MKll sporter. At 100 yds there would be 4 shots into .75" then one shot 4" out of the group. I gave up on this load because where I hunt its too powerful. I load my '06 down with IMR 4227.
 
Posts: 633 | Registered: 11 March 2001Reply With Quote
  Powered by Social Strata  
 


Copyright December 1997-2023 Accuratereloading.com


Visit our on-line store for AR Memorabilia