THE ACCURATERELOADING.COM FORUMS


Moderators: Mark
Go
New
Find
Notify
Tools
Reply
  
Stoney Point equipment
 Login/Join
 
One of Us
Picture of smedley
posted
Howdy all!

I have the Stoney Point OAL measurer devise with several bullet diameter inserts. I also have many of the drilled and tap shells.
I went to Midway to order up another caliber and couldn't find what I was needing. Actually I couldn't find any cartridges or collets.
I went to Midsouth and ..... nothing????
I went to the Stoney Point website and they didn't even show any of the products. I didn't use the "contact us" button yet. I wanted to come here and see if anybody knew what was going on.

Anybody????


Anybody?????

Thanks!


______________________

Smedley

______________________
From Audacity of Hope: 'I will stand with the Muslims should the political winds shift in an ugly direction.'
B.H.Obullshitter
------------------------------------
"Socialism is a philosophy of failure, the creed of ignorance, and the gospel of envy, its inherent virtue is the equal sharing of misery"
Winston Churchill
------------------------------------
"..it does not require a majority to prevail, but rather an irate, tireless minority keen to set brush fires in people's minds.." Samuel Adams
------------------------------------
Facts are immaterial to liberals. Twisted perceptions however are invaluable.
------------------------------------
We Americans were tired of being thought of as dumb, by the rest of the world. So we went to the polls in November 2008 and removed all doubt.....let's not do it again in 2012 please.
 
Posts: 3242 | Location: Cruising through the Milky Way at 98,000fps | Registered: 03 October 2005Reply With Quote
One of Us
Picture of Magnum61
posted Hide Post
Hornady bought them out from I heard. Check Hornady's website.


-Everybody has a dream hunt, mine just happens to be for a Moose.-

-The 30-06 is like a perfect steak next to a campfire, a .300 Win Mag is the same but with mushrooms and a baked potato-
 
Posts: 277 | Location: Washington State | Registered: 08 April 2005Reply With Quote
one of us
posted Hide Post
 
Posts: 1205 | Location: Minnesota | Registered: 07 February 2004Reply With Quote
One of Us
Picture of vapodog
posted Hide Post
quote:
Hornady bought them out from I heard. Check Hornady's website.

thumb


///////////////////////////////////////////////////////////////////////////
"Socialism is a philosophy of failure, the creed of ignorance, and the gospel of envy, its inherent virtue is the equal sharing of misery."
Winston Churchill
 
Posts: 28849 | Location: western Nebraska | Registered: 27 May 2003Reply With Quote
new member
posted Hide Post
Hornady did buy them try this link and choose from the drop down menu: https://www.hornady.com/shop/?ps_session=f353d055133bce...4c51c071150bb17e4e06
 
Posts: 19 | Location: UK | Registered: 29 December 2006Reply With Quote
One of Us
Picture of smedley
posted Hide Post
beer

Thanks Folks!!!!!!!!!!


______________________

Smedley

______________________
From Audacity of Hope: 'I will stand with the Muslims should the political winds shift in an ugly direction.'
B.H.Obullshitter
------------------------------------
"Socialism is a philosophy of failure, the creed of ignorance, and the gospel of envy, its inherent virtue is the equal sharing of misery"
Winston Churchill
------------------------------------
"..it does not require a majority to prevail, but rather an irate, tireless minority keen to set brush fires in people's minds.." Samuel Adams
------------------------------------
Facts are immaterial to liberals. Twisted perceptions however are invaluable.
------------------------------------
We Americans were tired of being thought of as dumb, by the rest of the world. So we went to the polls in November 2008 and removed all doubt.....let's not do it again in 2012 please.
 
Posts: 3242 | Location: Cruising through the Milky Way at 98,000fps | Registered: 03 October 2005Reply With Quote
One of Us
posted Hide Post
lock stock and barrel probably still has someof the stoney point stuff,Good tools
wayles
 
Posts: 57 | Location: western nebraska | Registered: 04 February 2006Reply With Quote
one of us
posted Hide Post
Smedley
You could make your own cases.
You need to buy a 5/16 36 tap tool and a letter K drill bit. You may need to do some digging to find a tool supplier that has this tap. I don't remember where I found mine, but I remember looking for a while.
I feel I get a more accurate measurement using "fire formed" brass when making the modified case.
You can also make the comparators too.

muck
 
Posts: 1052 | Location: Southern OHIO USA | Registered: 17 November 2001Reply With Quote
  Powered by Social Strata  
 


Copyright December 1997-2023 Accuratereloading.com


Visit our on-line store for AR Memorabilia