THE ACCURATERELOADING.COM FORUMS

Page 1 2 3 

Moderators: Mark
Go
New
Find
Notify
Tools
Reply
  
JUST FOR FUN..WHAT YEAR DID YOU.??
 Login/Join
 
One of Us
Picture of Rusty
posted Hide Post
1960, 30-06 on my Uncle Guy Anderson's Hollywood Press!


Rusty
We Band of Brothers!
DRSS, NRA & SCI Life Member

"I am rejoiced at my fate. Do not be uneasy about me, for I am with my friends."
----- David Crockett in his last letter (to his children), January 9th, 1836
"I will never forsake Texas and her cause. I am her son." ----- Jose Antonio Navarro, from Mexican Prison in 1841
"for I have sworn upon the altar of god eternal hostility against every form of tyranny over the mind of man." Thomas Jefferson
Declaration of Arbroath April 6, 1320-“. . .It is not for glory, nor riches, nor honours that we are fighting, but for freedom - for that alone, which no honest man gives up but with life itself.”
 
Posts: 9797 | Location: Missouri City, Texas | Registered: 21 June 2000Reply With Quote
One of Us
posted Hide Post
Very early in the 1960's with 12 ga. shotgun shell reloading. Red Dot I believe.
Quickly "graduated" to 30-06. I can recall using IMR 4064 and 3031 back then.
Now an obsession with too many calibers to count.
 
Posts: 201 | Registered: 30 August 2005Reply With Quote
One of Us
Picture of drhall762
posted Hide Post
1968. One of the local gun shops offered a free class on reloading. Reloaded for .30-06. I was 13 and the youngest in the class by far.


Dave

In 100 years who of us will care?
An armed society is a polite society!
Just because they say you are paranoid doesn't mean they are not out to get you.
 
Posts: 899 | Location: Ammon, NC | Registered: 31 December 2013Reply With Quote
One of Us
posted Hide Post
1972- at the tender age of 17. .38 Spl., followed by .222 Rem, .44 Mag., .45 Colt, .30/30, .25-06, .30 Herrett, .300 Savage, .35 Remington, .30/06, 8x57, .45ACP, M1 Carbine, 6.5x55, 7.62 Mauser, 9x18, 9x19, .30/40 Krag, .44-40, .303 Enfield, .32-20, .25-20, And probably a few I've forgotten about.....

Porosonik.


Vetting voters= racist. Vetting gun buyers= not racist. Got it?
 
Posts: 407 | Registered: 03 September 2012Reply With Quote
one of us
Picture of TCLouis
posted Hide Post
1966 started loading 44 Mag for my flat top.
Then in 67 I started loading for my 6.5X257 using reformed 30-06 MG brass, 48.0 grains of milsurp 4831 and 129 grain Hornady RN projies.

That very gun may account for a deer yet this year as it has not been out in the field this year . . . yet, now it is loaded with 140 Hornadys and some ball milsurp that I do not recall. 20 rounds last a while when one round a year confirms zero and one only hunts limited number of times with it. Before anyone gets their drawers in a wad, the way I hunt means a 100 yard shot is pretty long.



Don't limit your challenges . . .
Challenge your limits


 
Posts: 4267 | Location: TN USA | Registered: 17 March 2002Reply With Quote
One of Us
Picture of Rook49
posted Hide Post
I started in 1962 loading 20 ga. shotgun shells using the old Lee Loader in the red box similar to the one in the photo below. I didn't load any rifle rounds until years later which were .30-06.

[/url]
 
Posts: 32 | Location: Hampton, GA | Registered: 14 December 2016Reply With Quote
One of Us
posted Hide Post
1972 30-06 Remington BDL using a Lee Loader. Rifle would shoot 110, 130 and 160 gr into a nickel at 100 yrds off a rest. Hooked for life. Now I reload for 223, 6.5x55, 30-06, 35 whelen, 357, 44 mag, 45acp and still enjoying it.
Over the years, I have managed to hook 5 people on reloading.
 
Posts: 253 | Location: Texas by way of NC, Indiana, Ark, LA, OKLA | Registered: 23 January 2005Reply With Quote
One of Us
Picture of steyrsteve
posted Hide Post
1962. At the age of 15 I bought a near-new Remington 722 in .257 Roberts for $65. In with the deal was a Lee Loader, a box of 87 grain Speer's, a can of 4064, and a box of primers (sorry, I can't remember whether they were CCI or Remington).
With that set up, we made some great ammo. We would shoot at each other's cowboy hats, offhand, at 300 long paces. My buddy did better than I. My hat had two holes in the brim, his none.


NRA Life Member
DRSS-Claflin Chapter
Mannlicher Collectors Assn
KCCA
IAA
 
Posts: 473 | Location: central Kansas | Registered: 26 December 2013Reply With Quote
One of Us
Picture of steyrsteve
posted Hide Post
Just to clarify: We wouldn't be wearing the cowboy hats at the time! They would be leaning on a hay bale.


NRA Life Member
DRSS-Claflin Chapter
Mannlicher Collectors Assn
KCCA
IAA
 
Posts: 473 | Location: central Kansas | Registered: 26 December 2013Reply With Quote
one of us
posted Hide Post
Probably 1964, which would have been age 10, on a Herters press/dies/shellholders/etc. .30-06, 150 gr Sierra, 49 gr IMR 4320, RA '54 brass. This according to my Dad's notes made in Speer #7.

About same time loaded .30 Carbine w/110 gr Sierra RNs and Speer 100 gr 1/2 jackets, Hercules 2400. Can't remember the charge.
 
Posts: 670 | Location: Dover-Foxcroft, ME | Registered: 25 May 2002Reply With Quote
new member
posted Hide Post
1978 .357 mag
 
Posts: 12 | Location: western nc | Registered: 05 November 2014Reply With Quote
One of Us
posted Hide Post
I think in 1965 on a 22-250, then a 7 mag.


jmbn
Old and in the way
 
Posts: 283 | Location: Lakeview OR | Registered: 02 October 2013Reply With Quote
One of Us
posted Hide Post
1964 with Herters equipment loading a 243 with 85 gr. Sierra bullets and as it was then known 4831.
 
Posts: 304 | Location: Minnesota | Registered: 12 February 2007Reply With Quote
One of Us
Picture of dukxdog
posted Hide Post
16ga Shot shells in 1968 age 12
.22-250 & .30-06 in 1975 age 19


GOA Life Member
NRA Benefactor Member
Life Member Dallas Safari Club
Westley Richards 450 NE 3 1/4"
 
Posts: 867 | Location: Idaho/Wyoming/South Dakota | Registered: 08 February 2006Reply With Quote
One of Us
Picture of custombolt
posted Hide Post
Probably 1989 and a Lee hand loader for my 8mm Mauser 98. Just used the scoop that came with it. Can't remember which bullets I used. We used to turn old clay bricks to dust at 100 yards with it.


Life itself is a gift. Live it up if you can.
 
Posts: 5283 | Location: Near Hershey PA | Registered: 12 October 2012Reply With Quote
One of Us
posted Hide Post
Another year gone. I started in the mid-'50s loading shotgun shells with an old hand-me-down Lachmiller press and dies. I then moved up to loading .38 specials for my dad, and then on to loading for my .30-06. I still have the '06 and my dad's K-38.
C.G.B.
 
Posts: 1103 | Registered: 25 January 2005Reply With Quote
One of Us
posted Hide Post
1976 and .38 special. Casting bullets and buying linotype for 20 cents per pound. Free lead and wheel weights then as well. I still have a can of H-110 from 1976-77 with a price tag of $3.15 on it. LOL, loved those days.
 
Posts: 2752 | Registered: 10 March 2006Reply With Quote
new member
posted Hide Post
1965, for a .270 Win that I built on a Savage 110 barreled action with a Herter's glass-bedded and semi-finished French walnut stock. I was in high school, and shared the cost of the equipment with a friend, who had a .243 Savage 99 lever. My best load in those days used IMR 4064 and 110 gr. Sierras, devastating on fox, jackrabbits, and crows.
 
Posts: 79 | Registered: 21 December 2004Reply With Quote
one of us
Picture of Jim White
posted Hide Post
1961
22-250
35.5 grs. 4895
Sierra 55gr. spitzer
Never seen a 22-250 that refused to group that load under a minute.
Jim White
Prescott, AZ


99% of the democrats give the rest a bad name.

"O" = zero



NRA life member
 
Posts: 730 | Location: Prescott, AZ | Registered: 07 February 2001Reply With Quote
  Powered by Social Strata Page 1 2 3  
 


Copyright December 1997-2023 Accuratereloading.com


Visit our on-line store for AR Memorabilia