29 February 2008, 21:45
Calif. Hunter6mm Rem and 85 gr TSX
Who has experience with this combo? Do you have any suggestions for powder? I have only tried the Hornady ammo with the 95 gr SST bullet. The only other factory ammo is the Remington, so far as I have been able to find, anyway.
The rifle is an old model M-77 Ruger with the flat bolt.
04 March 2008, 20:46
Calif. HunterWow - nobody has used this combo? (32 views, though.) I guess the 6mm Remington is going away, soon.
04 March 2008, 21:01
snowmanMy 6 mm Rem likes RL19 for all bullets in the 85 to 95 gr range. Hope that helps
04 March 2008, 21:29
The DerekI shoot 38gr varget in my 243 with 85TSX's, Id guess something in the range of I4350 or RL19 would be just about good. You could always use varget also, but you prolly wont get max velocity that way...
04 March 2008, 21:36
Rob1SGMy most accurate loads with the 85-87 gr bullets are with RL 19. I get about 3100 FPS with this combo
04 March 2008, 23:36
Calif. HunterThanks! I've got both RL-19 and IMR-4350, so I'll try them.
04 March 2008, 23:41
seafire2I played with some 85 grain XLCs in my 6mm Rem, and I got some super impressive accuracy and velocity using the max recommended charges of IMR 4350....
I have too many calibers to hunt with, or not enough annual hunting opportunities.. however, in the field with the 6mm Rem, at TSX would be my first choice hands down...
04 March 2008, 23:57
miles58One more for the Varget/TSX combination. I get a lot of velocity out of it in a Sako L579, but the best accuracy comes at 38 grains
06 March 2008, 08:00
WestCoasterMy rifle likes IMR-4350 (243).
Use the 95 gr Partition mostly. I now have a box of 85gr TSX to experiment with and won't hesitate to use them if they shoot well.
07 March 2008, 15:30
himmelrrAnother vote for RL19 with the 85gr TSX. The rifle is an OLD Rem600 too.
RH