The Accurate Reloading Forums THE ACCURATE RELOADING.COM FORUMS Guns, Politics, Gunsmithing & Reloading Reloading AA # 9Go | New | Find | Notify | Tools | Reply | |
| AA # 9 | Login/Join |
| One of Us |
Has any one used AA #9 for .44 magnum? If so what kind of results did you see? | ||
|
One of Us |
VV, I did go through about 1/2 pound with different bullets and primers and just couldn't beat H110 and W296. That all was done in my S&W Model 29 with 6 3/8 barrel. Did not try in Marlin. Hope that helps! Smedley ______________________ Smedley  ______________________ From Audacity of Hope: 'I will stand with the Muslims should the political winds shift in an ugly direction.' B.H.Obullshitter ------------------------------------ "Socialism is a philosophy of failure, the creed of ignorance, and the gospel of envy, its inherent virtue is the equal sharing of misery" Winston Churchill ------------------------------------ "..it does not require a majority to prevail, but rather an irate, tireless minority keen to set brush fires in people's minds.." Samuel Adams ------------------------------------ Facts are immaterial to liberals. Twisted perceptions however are invaluable. ------------------------------------ We Americans were tired of being thought of as dumb, by the rest of the world. So we went to the polls in November 2008 and removed all doubt.....let's not do it again in 2012 please. | |||
|
| One of Us |
Smedley, Thanks bud. I have just found some AA # 9 very cheap and want to know how well it works. I currently use H110 and love it. I was curious to see if AA # 9 can stand up to the Heavy hunting loads I produce with H110 and Heavy LBC's. | |||
|
| One of Us |
It is a great powder in the 41. Probably a bit to fast for max loads in the 44. It is about one grain faster in my 41 than 2400 | |||
|
| one of us |
.223VV, Several people on the Gunloads/Cast Boolits site are using the milsurp version, WC 820, in the .44mag. with cast bullets. They've reported: 22.6gr. + 245gr. gas checked CB -> 1,389fps; SD = 25. 19.0gr. + 300gr. truncated cone CB -> 1,260fps and grouped into 2" @ 50 yds. Neither said whether they used LP mag. primers, however, but it's the better way. Btw, milsurp WC 820 varies [by lot #] between AA #9 and H 110 in burning rate. | |||
|
| one of us |
AA#9 has worked very well in two 629's (6" and 4" barrels). Using WWbrass/primers, hardcast 215SWC's and 23.2gr=1459fps, hardcast 300TC's and 18.5gr=1241fps. Both did not exhibit excess pressure signs, but sensed that the 300gr load was max. Gonna try AA#9 and 800x in my 10mmAuto next. Deke. | |||
|
one of us |
It's very close to 2400 in burn rate so for max. loads in the 44mag I would stick to H110/W296. No reason not to us it though especially if you get it cheap, you'll just be running about 100fps less for the same pressure.  http://www.accuratepowder.com/data/PerCaliber2Guide/Han...20133%20to%20135.pdf LIFE IS NOT A SPECTATOR'S SPORT! | |||
|
| One of Us |
I shot a lot of AA #9 behind the Lyman 429421 in my 629 Classic. I used 18 grains, never chrono'ed it, didn't see the point. Nothing was going to stop that hard cast bullet anyway. And I have also seen where a heavy for caliber bullet in front of #9 causes it to somehow slow its burn rate, giving excellent groups w/o excess pressure. I don't understand how, but it does it just the same... | |||
|
| One of Us |
Enforcer = AA#9 =H108 = WC820 $8/ pound virgin $6/ pound pull down http://www.patsreloading.com/patsrel/prices.htm same prices: http://www.gibrass.com/gunpowder.html $13/ pound http://powdervalleyinc.com/ | |||
|
| Powered by Social Strata |
 | Please Wait. Your request is being processed... |
|
Visit our on-line store for AR Memorabilia