Does anyone have any experience with this brass, particularly in 9.3x62mm and 7x57mm. How does the brass hold up. Would you compare it to say Remington Brass? Thanks ... Tom Purdom

I've been using 7.5 x 55mm Graf & Son [metric] brass (original production), which I think was made by Privi Partizan. It has performed well through 4 firings and FL resizings, but at low velocity (~1,660 fps)/low pressure. Other than a difference in weight between the Swiss-made and Graf's/Privi Partizan brass, I haven't seen any other differences worth mentioning.

I have used and am still using Prvi Partisan brass in several chamberings, 6.5x55, 7.5 French, 7.62x54-R, and 7.5 Swiss just to mention a few. (Don't know if they are all still on the market...some of my PP brass is now about 12 years old...)

I find it to be excellent brass, very uniform, and properly annealed. Flash holes in my brass are a bit on the small side in some lots, smaller than .080" that is. So you may need to go to ether a slightly smaller diameter decapping pin, or to drilling/uniforming the flash-holes with the appropriate letter or number drill to suit your fancy.

Generally speaking, I like it better than Remington brass.