THE ACCURATERELOADING.COM FORUMS


Moderators: Mark
Go
New
Find
Notify
Tools
Reply
  
How do I work up a load 150 TSX 300WSM?
 Login/Join
 
one of us
posted
:shock: I have 150gr TSX bullets, Reloader 19 powder and 210 primers, the load data I have found from various sources recommends from 64.1 -73.5 reloader 19 powder. The data is not for 150gr TSX bullets but from various other bullet manufacturers with the same weight of bullet. I understand the TSX has less resistance traveling down the barrel which results in lowered pressures, do I have to compensate for the lower pressures with more powder? I hear the TSX likes to be about .050 off the lands so that is where I think I'll start. Can I get half ways close without using a chronograph? Any comments welocome.
 
Posts: 113 | Location: no fixed address | Registered: 09 August 2003Reply With Quote
one of us
posted Hide Post
If you'll go over to the Shortmags website You can find out what some of the other WSM shooters are doing with TSX's.

http://www.shortmags.org/shortmags/
 
Posts: 588 | Location: Central Valley | Registered: 01 July 2002Reply With Quote
one of us
posted Hide Post
Anybody know where I can find Barnes X bullet load data? Barnes recommends simply adding 1-2 gr. of powder to the Barnes X load data to get the TSX load required. [Smile]
 
Posts: 113 | Location: no fixed address | Registered: 09 August 2003Reply With Quote
  Powered by Social Strata  
 


Copyright December 1997-2023 Accuratereloading.com


Visit our on-line store for AR Memorabilia