The Accurate Reloading Forums
RCBS trim pro shellholder plates

This topic can be found at:
https://forums.accuratereloading.com/eve/forums/a/tpc/f/2511043/m/5731071772

06 February 2024, 17:36
theback40
RCBS trim pro shellholder plates
I need a number 3 and 4. Anyone know where I might find them?
06 February 2024, 19:30
Luckyducker
I have the complete basic set of shell plates for the Trim Pro, including #3 & #4, if you want to buy them. I don't have the trimmer anymore and have no use for them. Let me know. I don't know what they are even worth, but maybe you know what they are worth to you.


Dennis
Life member NRA
06 February 2024, 22:56
theback40
They are for my pal in Namibia, and 3 and 4 was what he asked for. But, shoot me a pm with how many there are and a price. I will figure it out from there. Thanks!
10 February 2024, 03:02
Luckyducker
I have #02, #03, #04, #06, #10 (2 of this one?), #16, and #43. Some of them, if I remember correctly, were bought separately from the original set; for instance, #43 fits the 338RUM I used to own. I don't remember what shell plate fits what case as it's been too long since I have used these.


Dennis
Life member NRA
10 February 2024, 07:02
sambarman338
I'm glad to hear they use different shell holders(?).

My Redding case trimmer has a universal one and I find it capricious - open it too far and it will grab on a smaller diameter. If it is set up there but later grips a case at the right one, you might finish with a very short case.
10 February 2024, 19:28
eny
quote:
Originally posted by sambarman338:
I'm glad to hear they use different shell holders(?).

My Redding case trimmer has a universal one and I find it capricious - open it too far and it will grab on a smaller diameter. If it is set up there but later grips a case at the right one, you might finish with a very short case.


The old one had the different shell plates, new one is universal but it seems to work ok