The Accurate Reloading Forums THE ACCURATE RELOADING.COM FORUMS Guns, Politics, Gunsmithing & Reloading Reloading Pulling Big Bore bulletsGo | New | Find | Notify | Tools | Reply | |
| Pulling Big Bore bullets | Login/Join |
| new member |
So my first 416 Rigby reload is a little deper than the cannelure on the Hornady SP. So I grab my Quinetics bullet puller, and...Ooppps! 416 Rigby doesn't come close to fitting! I want the brass, the bullet I can live without... | ||
|
| one of us |
You need a collet type puller. RCBS and Hornady both make these. | |||
|
| one of us |
Won't hurt the bullet either. I would use the collet to just pull the bullet to the cannelure or just a little more and re-seat to where you want them, then go shooting. | |||
|
one of us |
Remove the die from your press. Place the cartridge in the shellholder, run the Ram to the top of its travel. Grab the bullet with a set of pliers. Brace the pliers on the top of the press and lower the ram. The bullet may or may not get marked up depending on haw careful you are and tight the case grips it. ------------------------------------ The trouble with the Internet is that it's replacing masturbation as a leisure activity. ~Patrick Murray "Why shouldn`t truth be stranger then fiction? Fiction after all has to make sense." (Samual Clemens) "Saepe errans, numquam dubitans --Frequently in error, never in doubt". | |||
|
| One of Us |
Sounds like you're trying to pull just one bullet - Insert round into gun and pull trigger   | |||
|
| Powered by Social Strata |
 | Please Wait. Your request is being processed... |
|
Visit our on-line store for AR Memorabilia