one of us
| I like it ok. In my 300RUM, I find acceptable submoa loads with it. I do get flyers from now and then. I get better velocities and almost no flyers with RL25. |
| | | Posts: 459 | Location: Finksburg, MD | Registered: 20 December 2003 | 
IP
|
|
new member
| I like it. It is the powder I use in my 300 RUM. 99.5 grains, 180 Accubond gives me the best groups at an average of 3360 (26 inch). |
| | | Posts: 17 | Location: TX | Registered: 31 December 2002 |
IP
|
|
one of us
| Great powder......I've worked with it extensively in the 8mm Rem Mag and found both performance and accuracy to be outstanding (best load to date has been 87.0 grains behind a 220 Sierra). Lee Martin www.singleactions.com |
| | | Posts: 380 | Location: Arlington, VA | Registered: 24 December 2002 |
IP
|
|
one of us
| 338 Lapua, 102grs Retumbo, 225gr Nosler Accubonds 3200fps, pretty consistant 1/2 minute at 300yds..........DJ |
| | | Posts: 3976 | Location: Oklahoma,USA | Registered: 27 February 2004 |
IP
|
|
one of us
| It's great in 7mm STW with 160gr and heavier bullets. |
| | | Posts: 142 | Location: Sacramento, CA | Registered: 15 December 2003 |
IP
|
|
Wonder if it would work well in my 300WM ?? It has a 24" barrel which could be a little short for a slow burner like Retumbo. 
