THE ACCURATERELOADING.COM FORUMS


Moderators: Mark
Go
New
Find
Notify
Tools
Reply
  
Loads for 308Win & 180 Hor SP?
 Login/Join
 
one of us
Picture of Jay Gorski
posted
Ill be loading for a Win. M100, plan on using RE15, Win brass, WLR primers, also have some Benchmark on hand as well as some Varget, any recipes you guys wanna share? Thanks!
 
Posts: 1745 | Location: WI. | Registered: 19 May 2003Reply With Quote
One of Us
posted Hide Post
43.5grs of Varget. Not high pressure, and incredibly accurate.
 
Posts: 132 | Location: Huntertown,Indiana | Registered: 11 May 2007Reply With Quote
one of us
Picture of Jay Gorski
posted Hide Post
What you using for brass, primer?
 
Posts: 1745 | Location: WI. | Registered: 19 May 2003Reply With Quote
One of Us
posted Hide Post
Lapua brass, and Fed210M primers. You can also use 41.5grs of H4895, or 42grs of IMR4064.

All three of these loads shoot very well at the range and aren't at the upper limits of pressure either.

BTW, the load with 4064 is jammed .010.
 
Posts: 132 | Location: Huntertown,Indiana | Registered: 11 May 2007Reply With Quote
One of Us
Picture of vapodog
posted Hide Post
I use IMR-4064 in mine but RL-15 or varget will do nicely too.

I load mine quite hot but the M-100 might not like that....so don't load over the book guidelines.


///////////////////////////////////////////////////////////////////////////
"Socialism is a philosophy of failure, the creed of ignorance, and the gospel of envy, its inherent virtue is the equal sharing of misery."
Winston Churchill
 
Posts: 28849 | Location: western Nebraska | Registered: 27 May 2003Reply With Quote
  Powered by Social Strata  
 


Copyright December 1997-2023 Accuratereloading.com


Visit our on-line store for AR Memorabilia