8x57mm Brass

The Accurate Reloading Forums

8x57mm Brass

This topic can be found at:
https://forums.accuratereloading.com/eve/forums/a/tpc/f/2511043/m/56010366

22 July 2003, 04:10

x-51

8x57mm Brass

Hello everyone, before I start loading for my old rifle, I'd like some opinions on brass. Which do you like best and why? Thanks in advance.

22 July 2003, 04:21

<eldeguello>

The kind that has Boxer primer pockets....

22 July 2003, 04:27

Aquavit

Winchester... because it has Boxer primer pockets. [Big Grin]

22 July 2003, 13:40

wildcat junkie

Once fired 30-06 G. I. brass because it's free! [Big Grin]

(at the local CMP service rifle clinic)

I trim about 3/16" off with a razor saw, run em through the 8X57 F/L die and finish up with my "Zip Trim. The Lee deburing tool works fine as a primer pocket swage remover.

This method makes great 8X57 cases! [Wink]

22 July 2003, 14:44

<9.3x62>

I've used Remington, Federal, and Winchester - they've all worked out fine. However, I tend to load mine 8x57s modestly. I'm sure Norma brass is probably "better", but probably not enough better to make a difference in most hunting situations.

9.3