THE ACCURATERELOADING.COM FORUMS

Accuratereloading.com    The Accurate Reloading Forums    THE ACCURATE RELOADING.COM FORUMS  Hop To Forum Categories  Guns, Politics, Gunsmithing & Reloading  Hop To Forums  Reloading    Going to shoot some Win 780 today out of my 7 mag

Moderators: Mark
Go
New
Find
Notify
Tools
Reply
  
Going to shoot some Win 780 today out of my 7 mag
 Login/Join
 
One of Us
Picture of ted thorn
posted
I loaded up some check loads and will head to the woods today to shoot over the chroney and check for pressure signs.

7 Rem mag with Win 780 and Hornady 139 grn Interbonds.

I'll post the results this evening.


________________________________________________
Maker of The Frankenstud Sling Keeper
Proudly made in the USA
Acepting all forms of payment
 
Posts: 7361 | Location: South East Missouri | Registered: 23 November 2005Reply With Quote
One of Us
Picture of ted thorn
posted Hide Post
Just something to do on a day with nothing to do.

All velocities are 3 shot averages from my 24" barreled Weatherby 7mm Rem Mag SBGM.

Winchester Brass
CCI 250 Primer
139 Grn Hornady Interbond
Winchester 780 Sup. Powder

66 Grns........3026
67 Grns........3086
68 Grns........3109
69 Grns........3191
70 Grns........3215

I am pleased with the speeds and there were no signs of high pressure noted.


________________________________________________
Maker of The Frankenstud Sling Keeper
Proudly made in the USA
Acepting all forms of payment
 
Posts: 7361 | Location: South East Missouri | Registered: 23 November 2005Reply With Quote
One of Us
Picture of Kabluewy
posted Hide Post
Nice. How full was the case with these loads? Did you test for accuracy?

KB


~-~-~-~-~-~-~-~-~-~-~-~-~-~-~-~-~-~-~-~-~-~-~-~-~-~-~-~-~-~-~-~-~-~-~-~-~-~

~-~-~-~-~-~-~-~-~-~-~-~-~-~-~-~-~-~-~-~-~-~-~-~-~-~-~-~-~-~-~-~-~-~-~-~-~-~
 
Posts: 12818 | Registered: 16 February 2006Reply With Quote
One of Us
Picture of ted thorn
posted Hide Post
Total case capacity was 88 grns. to the top of the case.

84 Grns to the tangent point of the shoulder/neck.

Accuracy will have to wait for better weather.


________________________________________________
Maker of The Frankenstud Sling Keeper
Proudly made in the USA
Acepting all forms of payment
 
Posts: 7361 | Location: South East Missouri | Registered: 23 November 2005Reply With Quote
One of Us
posted Hide Post
I load the 780 in my .300 WM. Good accuracy.



 
Posts: 3427 | Registered: 05 August 2008Reply With Quote
  Powered by Social Strata  
 

Accuratereloading.com    The Accurate Reloading Forums    THE ACCURATE RELOADING.COM FORUMS  Hop To Forum Categories  Guns, Politics, Gunsmithing & Reloading  Hop To Forums  Reloading    Going to shoot some Win 780 today out of my 7 mag

Copyright December 1997-2023 Accuratereloading.com


Visit our on-line store for AR Memorabilia