The Accurate Reloading Forums
Re: WC852n Powder

This topic can be found at:
https://forums.accuratereloading.com/eve/forums/a/tpc/f/2511043/m/554103351

14 November 2004, 18:32
woody1
Re: WC852n Powder
My use of WC852 so far has been pretty well limited to heavy cast boolits in the 30-30. I didn't try to discover what it was like, I just use it. 36 grains behind a Lyman cast 311291 at 183 grains gives me about 1900 fps out of a 20" microgroove barrel. Lot number is BAJ 47288. I think I bought it from Hi-Tech but I'm not sure. Here's a link you might wish to check out. http://www.castpics.net/RandD/load_data/load_data.htm

Regards, Woody

I forgot to mention that there's 2 different speeds of this stuff so be careful using data from others unless you have matching lot numbers.
15 November 2004, 00:02
RDub
Hi Woody
Ok, thanks. Interesting about the different burning rates.. Just another good reason not to assume anything.
And thanks for the link.
15 November 2004, 13:46
jeffeosso
I've been using 852 from pat's reloading, and they seem to be out... they compared it to h414/4350 (big range)... I was very conservative building loads, but I am tickled with it, once I found a decent starting ground.

I wouldn't go off alone on this stuff, as tehre are two burn rates, one like 414 and one like blc2.... HUGE difference

jeffe