THE ACCURATERELOADING.COM FORUMS


Moderators: Mark
Go
New
Find
Notify
Tools
Reply
  
30-06 and RL 15
 Login/Join
 
new member
posted
I have some 130 gr hornadys, RL 15, and a lot of 30-06 brass, but my Lee manual doesn't give me any loads for that combination. Does anyone here have any recipes for those components? I appreciate any information. Thanks, Joe
 
Posts: 6 | Location: Skiatook,OK | Registered: 04 May 2005Reply With Quote
One of Us
Picture of vapodog
posted Hide Post
stick that 130 grain bullet in front of 55 grains of RL15 and it'll scoot out the barrel over 3,000'/sec.

You might even work up to 58 grains and 3,300'/sec


///////////////////////////////////////////////////////////////////////////
"Socialism is a philosophy of failure, the creed of ignorance, and the gospel of envy, its inherent virtue is the equal sharing of misery."
Winston Churchill
 
Posts: 28849 | Location: western Nebraska | Registered: 27 May 2003Reply With Quote
one of us
Picture of Swede44mag
posted Hide Post
Check out several different reloading manuals. I try to have one from each manufacture that I use for load comparison. It gets expensive but it is good insurance.


Swede

---------------------------------------------------------
NRA Life Member
 
Posts: 1608 | Location: Central, Kansas | Registered: 15 January 2003Reply With Quote
one of us
posted Hide Post
you can use N140 data if the manual has it. I used RL15 data for N140 with 125gr NBT's. They are side by side or very close on my burn charts.


Difficulty is inevitable
Misery is optional
 
Posts: 1496 | Location: behind the crosshairs | Registered: 01 August 2002Reply With Quote
One of Us
Picture of vapodog
posted Hide Post
this is better

It's for 125 grain but will do for 130 as well.


///////////////////////////////////////////////////////////////////////////
"Socialism is a philosophy of failure, the creed of ignorance, and the gospel of envy, its inherent virtue is the equal sharing of misery."
Winston Churchill
 
Posts: 28849 | Location: western Nebraska | Registered: 27 May 2003Reply With Quote
one of us
Picture of ricciardelli
posted Hide Post
RL-15 From 46.2 grains to 57.0 grains
Winchester WLR Primer

I found the following more to my liking:
TAC From 51.9 grains to 54.6 grains
Winchester WLR Primer
 
Posts: 3282 | Location: Saint Marie, Montana | Registered: 22 May 2002Reply With Quote
One of Us
posted Hide Post
Very accurate bullet out of my BRNO under 50gr of XMR 2015. Haven't shot anything with it yet but if it acts like it's non canelured, non interlocked brothers in 6, 6.5 and 7mm it will be very good for up to medium sized deer.
 
Posts: 2032 | Registered: 05 January 2005Reply With Quote
  Powered by Social Strata  
 


Copyright December 1997-2023 Accuratereloading.com


Visit our on-line store for AR Memorabilia