The Accurate Reloading Forums
What 7mm mag bullet do you use for deer + moose
25 October 2002, 04:01
mikehjdWhat 7mm mag bullet do you use for deer + moose
Good day
Just wondering what you guys have been using in your 7mm mags. I've been using 175gr
nosler partitions for both deer and moose. My Honady ballistic charts show it as not having
enough trajectory difference between the 140gr and 175gr to worry about. Anyone have
more accurate information in trajectory between the lighter bullets and the 175 gr that I'm
using.
Thanks
Mike
25 October 2002, 04:45
POP160 gr Premium for everything. From antelope to elk! At 3000-3100 fps
25 October 2002, 05:22
jpbI agree with Pop. I use 160gr Barnes X or Nosler Partitions if I'm using my 7mm Rem mag for deer or moose.
Some rifles don't seem to like the X bullets, but if yours does they sure penetrate well. Of course, so does the Nosler, and (perhaps) they expand a bit more in a deer chest.
Either way, venison!
![[Smile]](images/icons/smile.gif)
25 October 2002, 11:02
ricciardelli168 Sierra HPBT
25 October 2002, 11:13
Coach HuntHowdy,
I don't shoot a 7mm Mag.; however, I do shoot a .280 Rem. My favorite bullet in that rifle is the 150 gr. Scirroco....moly coated! At 2884 fps., it shoots very flat, very accurate (5/8ths group for 3 shots) and retains 70% of its weight on deer size game. I have one bullet recovered from small mule deer that weighs exactly 120.1 grain. That is right at 90% weigh retention. The mushroom is perfect also. Hope this helps some.
Coach
25 October 2002, 13:41
<BarryH>Mike,
I wouldn't change a thing. That's a great combination.
As far as the ballistic tables go, they are all about the same. That 175 will shoot plenty flat, for any reasonable range.
The difference between the 140 Partition and the 175 is what, an inch or inch and a half at 300 yds? (given the same zero)
Barry
25 October 2002, 17:19
<FarRight>hot loaded 160 gr Partition...flat enough for antelope, has good expansion, and enough weight retention/penetration for the big stuff.
26 October 2002, 03:42
<eldeguello>I use the Nosler Partition 175-grain in both the 7mm Magnum and the 7X57mm....exclusively!!
![[Big Grin]](images/icons/grin.gif)
(After many years of trying different weights and types.
![[Roll Eyes]](images/icons/rolleyes.gif)
26 October 2002, 03:47
<George Hoffman>dI have always used 175 grain bullets in both of my 7 mags. In fact I deep throated my mags to be able to seat the longer bullets out as far as the
the magazine will allow. If iam going to use lighter bullets then I will use my .270. Warren Page always advocated the use of the 175 gr bullets in his 7 mags.
George
26 October 2002, 04:41
<JLR>File this one under strange but true.
After reloading Noslers from 140 up to 160 grn. with various powders, in my factory Rem 700 7mm mag, I found the absolute best accurcy with a Winchester 150 gr. factory round!!! Who woulda guessed it?
26 October 2002, 14:39
EagleyeI own two 7mm Rem Mags. They are both 700 Remingtons, one an early issue ADL w/stainless barrel and the other a "Classic" I prefer the 160 Partition for all work with these rifles, since it is superbly accurate in both and at close to 3100 fps, penetrates like gangbusters.
![[Smile]](images/icons/smile.gif)
I have never recovered one of these from a deer, only recovered one out of 4 from elk, and one out of 6 from moose. The ADL also shoots the 150 Partition very well, but I only recently tried it, so have not shot anything with it. Maybe next hunting season. Regards, Eagleye.
26 October 2002, 14:55
<Boyd Heaton>Just a ?...What did everybody use before these so called SUPER BULLET'S came out...??????Mine would also be 168 HPBT.................
26 October 2002, 16:08
POPGame bullets for game. Matchkings for matches!
![[Mad]](images/icons/mad.gif)
26 October 2002, 16:38
<Boyd Heaton>Whatever....How about a 162gr A-Max.....
[ 10-26-2002, 07:44: Message edited by: Boyd Heaton ]27 October 2002, 01:58
Terry BlauwkampFor Deer, anything will work, but for Moose, shoot nothing less than the 175 gr Hornady or Nosler Partition.
27 October 2002, 03:15
<eldeguello>quote:
Just a ?...What did everybody use before these so called SUPER BULLET'S came out...??????Mine would also be 168 HPBT............
Well, the Nosler Partition has been on the market since the early 1950's. So, there is no "before" for this bullet! The bullets made prior to that time are generally gone, except for the Rem. Corelokts. ![[Big Grin]](images/icons/grin.gif)
27 October 2002, 04:11
waksupiI like a 170 in the 7mm. bore, wheter it be the 7X57, or the 7 mag. Penetration is always excellent, and on smaller game such as deer and antelope, will not be nearly so destructive as the lighter weights. Stick to what you have and be happy!
27 October 2002, 07:53
todbartellI am starting to tinker with the Barnes 130 gr. XBT. My first and only group was .83" @ 100m for 3 shots. I wouldn't hesitate to use this bullet on deer or moose, as a lighter X bullet will still penetrate as deep or deeper as a 160 gr. Partition.
28 October 2002, 05:37
<Budweiser>I use the 175GR Grand Slam for moose and deer,it works for me.
Straight Shooting
Budweiser
02 November 2002, 10:16
Yap DogFor deer here in Saskatchewan I found that anything over 140gr is more than you really need. I tried 140 Nosler Ballistic Tips at 3000fps (downloaded a bit to take into account the thinner jacket). Worked fine on a big mule deer and several whitetails. For moose nothing less than a 160grain premium bullet. Why use anything less on such a big animal? Had good success with both the Nosler Partitions and the Barnes X 160grains at 3100-3200 fps. I have a Ruger #1 7mm Mag that seems to shoot quite fast. These are Federal Premiums and my own reloads. They are both in the same velocity range and below maximum in several loading manuals using H1000.
19 March 2003, 07:20
Alaska Bush ManMy Pet Load 7mm Mag
160 Nosler Part
IMR 4350 @ 61.0
FED 215M Primers
Fed Cases
Excellent Load for Deer to Moose
19 March 2003, 07:24
Mark GAnother vote for the 160gr Nosler Partiton.
19 March 2003, 08:24
jeffeossoi load the 7 mag with custom 300 gr copper solid, and then lathe turn the belt off, and the head down to .500... and load the whole thing into a 50 bmg !!!
jsut kidding
jeffe
19 March 2003, 09:12
fredj338I'm also in there w/ the 160gr NP form my 7mm Dakota @3200fps+. I hve only taken up to elk size game but I would feel confident on eland/moose size critters using a good 160gr bullet. It shoots very flat & hits hard @ extended range. A side to using the heavier bullet, I took a pronghorn through the shoulders @ just over 100yds. The pronghorn went down on the shot, never got up and very little blood shot meat was found around the entry/exit. I'm sold.
19 March 2003, 10:11
DutchI've been shooting 140 gr. XLC's and 130 gr. GS customs on elk and mulies. Good accuracy, good trajectory, good penetration. FWIW, Dutch.
19 March 2003, 10:57
<FarRight>I use a 160 gr Partition over a case full of H870. This load is for everything from pronghorns to moose.
H870 has been discontinued. I will be working up a new load. Probably a 160 gr Accubond and RL19. If they don't work, I'll go with either a 160 or 175 gr Partition and try Rl19 and RL22 with them.
If I were you, I wouldn't change a thing. Very good load.
19 March 2003, 15:43
mikehjdI'm using 61grs IMR4350 with CCI mag. primers. With my Hornady bullet I can punch one jagged hole, with the Partitions I'm up around an inch
( - + ) Plenty good for the good ol Moose
Mike
20 March 2003, 04:47
jrslateGentlemen,
I use only the 175 gr. Nosler partition. It is effective and deep penetrating on nearly all game. Load it to 3000 fps, and it will shoot flat enough to shoot long distances, and it will penetrate all day long. Has worked for me on game up to and including a few eland.
My load:
175 gr. Nosler Partition
66.0 gr. IMR-7828
CCI-250 primer
R-P or W-W cases
Joel Slate
Slate & Associates, LLC
www.slatesafaris.com7mm Rem Mag Page
www.slatesafaris.com/7mm.htm