Good day
Anyone know of anyone who makes a .17 collet for a RCBS puller. I've overloaded about 50 rounds and I would like to salvage at least my brass because they are only once fired. Any other ideas on how to pull these tiny bullets would also be appreciated.
Mike

I use the inertia or hammer type bullet pullers. They work well and the bullet is not damaged in the process.

I also use a kinetic type puller, a Quinetics, and it handles the .17 cal. bullets as well as other calibers. With some cotton batten stuffed in the nose to cushion the impact it does quite the good job. Best wishes.

Cal - Montreal