I will be reloading 358 Browning rifle rounds and Smith and Wesson 357 rounds. I shoot 38 special for targets and use a 357 load for a backup when I am hunting. Thats what I will be reloading so which press would you recommend a single or turret since I will be doing three different loads. I do not know anything about reloading so I would appreciate any information and I am in no big hurry in doing these loads either!
Originally posted by Buzzy: I will be reloading 358 Browning rifle rounds and Smith and Wesson 357 rounds. I shoot 38 special for targets and use a 357 load for a backup when I am hunting. Thats what I will be reloading so which press would you recommend a single or turret since I will be doing three different loads. I do not know anything about reloading so I would appreciate any information and I am in no big hurry in doing these loads either!
I recommend that a beginner start with a single-stage press, but basically, the difference is that you have to do a lot more die screwing in-screwing out with a single stage than you would if you had a turret press that would take a number of dies. Otherwise, I'd say there's not much to choose between the two types.
"Bitte, trinks du nicht das Wasser. Dahin haben die Kuhen gesheissen."
Posts: 4386 | Location: New Woodstock, Madison County, Central NY | Registered: 04 January 2005
I`d go with a single stage to start. The Lyman manual is the one I like for beginners. Speer, Hornady, or Nosler also are good. Be sure to pay attention to the instruction on reloading and ignore the data to begin with. After you understand what you`re doing and why then get into the data and decide on powder, primer, bullet, ect.
------------------------------------ The trouble with the Internet is that it's replacing masturbation as a leisure activity. ~Patrick Murray
"Why shouldn`t truth be stranger then fiction? Fiction after all has to make sense." (Samual Clemens)
"Saepe errans, numquam dubitans --Frequently in error, never in doubt".
Posts: 2535 | Location: Michigan | Registered: 20 January 2001
Buzzy, I think the best thing to do is to get some books on the subject, they help a lot. The NRA has a book and I think it is free. You need some thing to tell you the how to's and what for's along with what tools. That may even help you with your task of what to buy in the line of tools. hope things work out Buzzy.
Posts: 185 | Location: MICHIGAN | Registered: 21 December 2005