According to RCBS, the #3 shellholder is the proper one...(same as the .308 and .30-06 and other similar cases).

For Lee, it would probably be the #2 or #10.

Antlers- 9,3x62 has same headdim. as 3006.

I've tried the #10 and it seems to work fine - THANKS!!

I've just started loading up my first-ever batch of 9.3 X 62 and have run into something confusing. I've got Lee shellholders and assumed that I should use the same shellholder as the 30/06 cases (this is consistent with the shellholder recommended on the Redding die box); the Lee shellholder set doesnt list the 9.3 X 62. The Graf case will go in the shellholder, but only goes in with some effort. I went thru the whole set of shellholders and the one that fits best is the same one recommended for 220 Swift, 225 Win, and 6.5 Jap. Is this the one I should use? What's up with this?

This was also posted on the Med Bore Forum