Thanks I looked at our site, lots of info however I would like to narrow it down a bit.

Thanks Martin

Martin

I load for two .350's. Both like IMR4064 with 250 grainers.

Mine likes the Speer 250 RN (yes, RN, that's right--I have a bunch of them from many years ago).

My son's .350 REALLY likes the Hornady 250 gr RN. Three touching at 100yds is common.

With IMR4064 start around 54 gr and work up. No reason R-15 shouldn't do the same thing.

WN

my 600rem liked 57,58,of imr4895 also h335 worked

Thanks guy's,I'll give 4064-Rl15-and 4895 a try.
just did not wanted to end up with 10 diff. powders

Thanks Martin

Hi Martin, good to hear from you again. I use 60gr of IMR 4320 in mine, behind either the 250 gr Speer or Hornady. Accurate and 2630ish fps velocities. - Dan

Thanks Dan and Steve,both of you confirm the old master Ken Waters and the acc. load from Sierra.
I was just trying to cheat a litle since I have a lot of powders but this one ,and the powder store is 300 K's away.

Dan;correct me if I am wrong , your 350 is also build on a full lenght action is it not ?
If so that would explane the 60 grains.
I am asking because K W max is 56

Thanks Martin

Yes Martin, it is. I use a COL of 3.17" for the 250's. It gets me just a little more velocity then my Whelen with the same bullets. - dan

Looks like I have to mailorder some of that powder in,GOD I hate that.

Thanks Dan

I might have some extra in the powder box, Martin, how far are you from edmonton? - Dan

Dan I am in Hinton 290 KM from Edm.
I checked my supl. and I am low on RL15 and XMP5744 as well so I'll phone Galgary tomorow and see how much it is for 10 lbs by Loomis.
If not to bad and they have what I need I'll go that way.
If not I'll let you know.

Thanks a lot
Martin

Ok, Martin. Let me know. - Dan