THE ACCURATERELOADING.COM FORUMS


Moderators: Mark
Go
New
Find
Notify
Tools
Reply
  
Really need Info!!!
 Login/Join
 
One of Us
posted
I need any and all loads for "cast lead bullets" in the 9.3x57mm cal. van
 
Posts: 442 | Location: Idaho | Registered: 16 December 2005Reply With Quote
One of Us
Picture of smedley
posted Hide Post
Not trying to be an ass but, did you go to the favorite loads forum and then use the find button to do a search?


______________________

Smedley

______________________
From Audacity of Hope: 'I will stand with the Muslims should the political winds shift in an ugly direction.'
B.H.Obullshitter
------------------------------------
"Socialism is a philosophy of failure, the creed of ignorance, and the gospel of envy, its inherent virtue is the equal sharing of misery"
Winston Churchill
------------------------------------
"..it does not require a majority to prevail, but rather an irate, tireless minority keen to set brush fires in people's minds.." Samuel Adams
------------------------------------
Facts are immaterial to liberals. Twisted perceptions however are invaluable.
------------------------------------
We Americans were tired of being thought of as dumb, by the rest of the world. So we went to the polls in November 2008 and removed all doubt.....let's not do it again in 2012 please.
 
Posts: 3242 | Location: Cruising through the Milky Way at 98,000fps | Registered: 03 October 2005Reply With Quote
one of us
posted Hide Post
Van, whats your avatar picture of?

I dont think you will find any load data. I worked up my own load for 286gr bullet. The guys at the husqvarna site where you posted had the best imfo.

IMR 4895 seems to me to be a good choice. 45gr/ 286gr
 
Posts: 4821 | Location: Idaho/North Mex. | Registered: 12 June 2002Reply With Quote
One of Us
Picture of vapodog
posted Hide Post
quote:
Originally posted by GSP7:
Van, whats your avatar picture of?

sure looks like a powder horn to me.....what did you think it was?


///////////////////////////////////////////////////////////////////////////
"Socialism is a philosophy of failure, the creed of ignorance, and the gospel of envy, its inherent virtue is the equal sharing of misery."
Winston Churchill
 
Posts: 28849 | Location: western Nebraska | Registered: 27 May 2003Reply With Quote
one of us
posted Hide Post
powder horn I see that. The brownish part stands out and looks like somekind of round plastic part with a white cotton wick wedged in a slot??? What the?
 
Posts: 4821 | Location: Idaho/North Mex. | Registered: 12 June 2002Reply With Quote
One of Us
posted Hide Post
I make custom powder horns,and that is one. I will try to find some better pictures. van
 
Posts: 442 | Location: Idaho | Registered: 16 December 2005Reply With Quote
  Powered by Social Strata  
 


Copyright December 1997-2023 Accuratereloading.com


Visit our on-line store for AR Memorabilia