Federal .308 load components

The Accurate Reloading Forums

This topic can be found at:
https://forums.accuratereloading.com/eve/forums/a/tpc/f/2511043/m/504103238

14 March 2008, 18:07

6XCVE

Federal .308 load components

Hi,
Has anyone out there any Load information about Federal factory loads.
The ones I am interested in are the 150gr Nosler ballistic tip (P308F) and the 168gr Sierra Match King (GM308M).
What Primer, type of Powder and how many grains are in each of these loads.

Thanks
Neil.

14 March 2008, 20:15

jjmp

hey neil,
factory powders are often blends,or special powders made to their spec''s and closely guarded. how ever their primer choice would be their own brand probaly federal gold match=FG210M....FOR YOUR 150''S I'D CHOOSE VIT A VOY...N-135 ...OR ..VIT A VOY... N 140..
VARGET made in your country and marketed as 2200 something would be stellar also!
for that 168 reloader-15 is great as is Varget again and BL-C(2).....hope this helped....regards

If a sportsman true you'd be
Listen careefully to me........., Never, never let your gun Pointed be at anyone, That it may unloaded be Matters not the least to me. When a hedge of fence you cross Though of time it cause a loss From your gun the cartridge take For the greater safety sake. If between you and a neighbour's gun Bird shall fly or beast may run Let this rule be thine "Follow not accross the line." Stops and beaters often unseen Lurk behind some Leafy screen. Calm and steady always be "Never shoot where you can't see."
You may kill or you may miss
But at all times think of this:
"All the game ever bred Won't repay one man dead."