The Accurate Reloading Forums
Cannelure On Hornady Interlock

This topic can be found at:
https://forums.accuratereloading.com/eve/forums/a/tpc/f/2511043/m/50010965

13 February 2002, 06:08
Leo M
Cannelure On Hornady Interlock
Does the cannelure on the Hornady Interlock have any adverse reaction if you seat the bullet close to the lands and the cannelure is way ahead of the end of the neck? Or should the bullet be seated to the cannelure?
13 February 2002, 06:25
beemanbeme
ignore the cannelure.


13 February 2002, 12:27
tsturm
quote:
Originally posted by beemanbeme:
ignore the cannelure.

Ditto!!

13 February 2002, 13:22
<2ndaryexplosioneffect>
quote:
Originally posted by tsturm:
Ditto!!

Ditto, but also make sure not to crimp

Shoot safe,
Mike

13 February 2002, 16:12
jrslate
Gentlemen,

I know on the Hornady 175 gr. Interlock 7mm bullet, the cannelure is at the proper location to seat the bullet to the maximum SAAMI length. This may be much less than your gun will chamber, but it works well for me. It may just be a coincidence that the cannelure on this bullet is in that location.

Joel Slate
Slate & Associates, LLC
The Safari Specialists
www.slatesafaris.com

7mm Rem Mag Page www.slatesafaris.com/7mm.htm

14 February 2002, 03:31
Terry Blauwkamp
I seat all Hornady bullets to the cannelure, adn even crimp most of them with a Lee Factory Crimper, and have never had any problems.
14 February 2002, 14:18
<dr280>
What cannelure??????????
I seat my 280 with the cannelure just out of the neck of the case.