18 July 2012, 18:52
7mmfreak.30-30IMP from .375WIN
Who does this and how many dies do you use?
I was thinking .358, .323, then final pass through a .30-30 before fireforming.
19 July 2012, 01:19
MuskegManBTDT - one pass in a .30-30 FL or NK die does the trick. The 15.5 deg shoulder is shallow enuff that you don't have to worry about buckling or collapsing the case like you would on a 20 or 25 deg shoulder.
19 July 2012, 03:34
SR4759Make sure your .375 brass is rounded up with an expander so it has no dents or dings at the case mouth. Make sure you do not over lube. If you get dents take it in stages. I know a guy that went this route to make thick necked cases for a .30 Herett.
19 July 2012, 03:52
theback40Size the case first with the seating die with the seating plug removed. I've never had a problem buckling the 375 brass in the imp die doing it that way.
19 July 2012, 06:37
Alberta CanuckSounds like a lot of work to me.
Back in the early 1960s when I had a .30-30 Improved I made my brass rthe easy way.
I'd load up whatever new or used .30-30 brass I had on hand and shoot it in my rifle.
Never had any chambering, pressure, case loss, or any other problems doing it that way.
Would trim to length after the first firing, just to make sure the end of the brass was a nice even OAL all the way around the end of the neck, mainly for future crimping purposes.
Worked for me.
19 July 2012, 08:11
Doublessquote:
Sounds like a lot of work to me.
Back in the early 1960s when I had a .30-30 Improved I made my brass rthe easy way.
I'd load up whatever new or used .30-30 brass I had on hand and shoot it in my rifle.
Never had any chambering, pressure, case loss, or any other problems doing it that way.
Would trim to length after the first firing, just to make sure the end of the brass was a nice even OAL all the way around the end of the neck, mainly for future crimping purposes.
Worked for me.
What AC said...
19 July 2012, 13:11
7mmfreakquote:
Originally posted by Alberta Canuck:
Sounds like a lot of work to me.
Back in the early 1960s when I had a .30-30 Improved I made my brass rthe easy way.
I'd load up whatever new or used .30-30 brass I had on hand and shoot it in my rifle.
Never had any chambering, pressure, case loss, or any other problems doing it that way.
Would trim to length after the first firing, just to make sure the end of the brass was a nice even OAL all the way around the end of the neck, mainly for future crimping purposes.
Worked for me.
I'll do it the easy way too for ammo to be shot in Lever Action Silhouette but for 150gr TSX-FN loads I'm going to use the heavier .375WIN brass.