The Accurate Reloading Forums
Case Lube Newbie Question

This topic can be found at:
https://forums.accuratereloading.com/eve/forums/a/tpc/f/2511043/m/4991040091

17 June 2013, 04:57
Ingwe623
Case Lube Newbie Question
I am going to neck-size with a Lee Collet Die, bump shoulder with a Redding Body Die, and seat the bullets with a Redding Competition Bullet Seating Die.

Can you recommend which lube is required for these dies??

Thanks so much!
17 June 2013, 05:20
Ol` Joe
Imperial with the Redding body die, nothing with the other two


------------------------------------
The trouble with the Internet is that it's replacing masturbation as a leisure activity. ~Patrick Murray


"Why shouldn`t truth be stranger then fiction?
Fiction after all has to make sense." (Samual Clemens)

"Saepe errans, numquam dubitans --Frequently in error, never in doubt".



17 June 2013, 06:01
Ingwe623
Thanks Joe!

You do use neck lube (dry?) when seating the bullet...correct?
17 June 2013, 06:44
Rusty
Imperial


Rusty
We Band of Brothers!
DRSS, NRA & SCI Life Member

"I am rejoiced at my fate. Do not be uneasy about me, for I am with my friends."
----- David Crockett in his last letter (to his children), January 9th, 1836
"I will never forsake Texas and her cause. I am her son." ----- Jose Antonio Navarro, from Mexican Prison in 1841
"for I have sworn upon the altar of god eternal hostility against every form of tyranny over the mind of man." Thomas Jefferson
Declaration of Arbroath April 6, 1320-“. . .It is not for glory, nor riches, nor honours that we are fighting, but for freedom - for that alone, which no honest man gives up but with life itself.”
17 June 2013, 09:08
ramrod340
quote:
Imperial

+1

Hornady's Unique works pretty good as well.


As usual just my $.02
Paul K
17 June 2013, 23:56
bartsche
coffee Bardahl ! beerroger


Old age is a high price to pay for maturity!!! Some never pay and some pay and never reap the reward. Wisdom comes with age! Sometimes age comes alone..
18 June 2013, 00:19
Jim C. <><
All commercial case lubes work quite well when used correctly. What is the best choice for anyone is his preference for method of application and, if needed, removal.

I hate lube pads becuse theysoon get nasty and I hate sprays because of the cost and mess of over spray. I love finger applied lubes because it's quick to apply, clean and easy to remove if I bother with that. The soft waxes such as Imperial and Unique suit me perfectly.
18 June 2013, 00:26
Leopardtrack
Thanks guys!

I wasn't sure about lube in the seating die
18 June 2013, 07:37
bartsche
quote:
Originally posted by Jim C. <><:


I hate lube pads becuse theysoon get nasty


Confused?????????? bewildered roger


Old age is a high price to pay for maturity!!! Some never pay and some pay and never reap the reward. Wisdom comes with age! Sometimes age comes alone..
18 June 2013, 22:42
Stonecreek
quote:
Originally posted by Ingwe623:
Thanks Joe!

You do use neck lube (dry?) when seating the bullet...correct?


No. The insides of the neck should be clean and free of any kind of lubricant.
19 June 2013, 00:18
wasbeeman
I've lube pads that I've used for years and years. how do they get nasty? lubing 1500 cases for a pdog shoot one at a time using your fingers, seems like it'd be kinda tedious.


Aim for the exit hole
20 June 2013, 22:46
Reloader270
Imperial wax for me!
21 June 2013, 04:10
Jim C. <><
quote:
lubing 1500 cases for a pdog shoot one at a time using your fingers, seems like it'd be kinda tedious.


No matter how many your loadin' or what for, if applying Imperial/Unique/etc is "tedious" you're doing it wrong. Touch the tips of your lefty thumb and first two fingers to the lube and twirl lube on the cases between picking each one up and placing it in the shell hoder for sizing. It takes very little time once you get it right and you can't lube on a pad any faster. And wax is much cleaner to deal with than any foul grease/oil on a pad.
21 June 2013, 07:23
ledvm
I don't think you can beat Lee Case Resizing Lubricant.


~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~
J. Lane Easter, DVM

A born Texan has instilled in his system a mind-set of no retreat or no surrender. I wish everyone the world over had the dominating spirit that motivates Texans.– Billy Clayton, Speaker of the Texas House

No state commands such fierce pride and loyalty. Lesser mortals are pitied for their misfortune in not being born in Texas.— Queen Elizabeth II on her visit to Texas in May, 1991.
22 June 2013, 02:45
Rob Haught
I use Hornady One Shot spray. It's worked well for me. I'm going to try some of the Dillon case lube on the advice of a couple friends.
22 June 2013, 09:59
wasbeeman
quote:
Originally posted by Jim C. <><:
quote:
lubing 1500 cases for a pdog shoot one at a time using your fingers, seems like it'd be kinda tedious.


No matter how many your loadin' or what for, if applying Imperial/Unique/etc is "tedious" you're doing it wrong. Touch the tips of your lefty thumb and first two fingers to the lube and twirl lube on the cases between picking each one up and placing it in the shell hoder for sizing. It takes very little time once you get it right and you can't lube on a pad any faster. And wax is much cleaner to deal with than any foul grease/oil on a pad.

This was pretty much hypothetical on my part since I've still got a full bottle of RCBS lube. Smiler


Aim for the exit hole