Alright, guys, I need some help. I have a little extra time on my hands this semester, and I want to get started reloading metallic cartridges. Right now I just want to load some rifle cartridges (I understand loading for pistols is a little different), I'm not looking to break any accuracy records, I just want to load some of my own hunting ammo. A friend showed me what to do a while ago, but honestly, I don't remember everything, and just don't feel confident going down to the basement and start reloading (I do still have all the equipment, though). Also, the friend has moved away, and I don't know anyone else that loads metallic cartridges. So, I was wondering if you guys could put me onto a book, video, or website that will help me get into reloading. I'm not completely in the dark on this subject, like I said, I was taught before, I just didn't get into it quick enough to retain what I was taught. I also load thousands and thousands of shotgun shells on a progressive press every year (I loaded somewhere around 15,000 this summer, actually), so I do reload, just not metallic cartridges. Like I said, any help is appreciated, guys, thanks again.

Get the "ABC's of Reloading" and three or four different manuals and read them. Use a highlighter and take notes. You'll retain the info better. Sounds like you're in college, so you should be well practiced at that. Also check out steves pages.

http://stevespages.com/page8.htm

good luck

From someone who is a little further along the learning curve, but still just starting (I loaded my first 15 rounds last night): get some reloading manuals and start reading - they all present the same principles, just slight differences in the detail. I have an early Barnes manual, Speer #12, and the latest Hornady & Lyman manuals - all are good for reloading basics except Barnes, with Lyman & Speer getting my nod for clarity.

Bruce

the above two recommendations are golden. I wouldn't buy anything until I'd followed up on those.

Also find someone that does it ask them to show you.

Rifle and revolver/pistol ammo can be loaded on the same press. Shotshell is a totally different ball game.

One thing I forgot to mention: I have been in email contact with a local guy, asking him questions about things that are either ambiguous in the manuals, or are specific to reloading in this part of the world (where ADI powder is the most common to use). As you're from the States, and have already found this forum, you're probably covered in this respect too - from my little time lurking around here there are some very knowledgeable, friendly, and helpful people here....

Bruce

Thanks a lot guys, I'll look into the books and I know I have some reloading manuals around that I can read, so I'll get on that. Yeah, I'm in college now, so I guess I'm just giving myself one more subject to study now...personally, I think Penn State should be offering courses in this, at least I'll definately be able to use it in life opposed to some other classes I have!

Talk to some level headed hunters, bench shooters, etc around your area and have them lead you to a good reloader who loves to teach the new comers. This isn't easy at times because there are a lot of "wanna be king" type people who will fill your head with a lot of BS. Read, ask and find a reloding friend. Go slow and don't skip being careful and clean.

Find an experienced reloader, and have him show you the basics. If you can, reload a bit on his press to get the hang of it first.

There are a number of starter kits out there. If you are on a tight budget, the Lee kit is a cheap way to go. You will end up replacing most of it in the end, but it will get you started.

Justin, good advice given so far, I'll add the Nosler reloading manual, I like the couple of editions I have very well. I also like to get some of the good catalogs such as Sinclair and look at their gear for reloading too, it's informative and fun.

Good Luck--Don