THE ACCURATERELOADING.COM FORUMS


Moderators: Mark
Go
New
Find
Notify
Tools
Reply
  
7x61 Sharpe and Hart
 Login/Join
 
one of us
posted
All,
Have gun parts and smith butneed brass for 7x61 Sharpe and Hart. I looked on Norma's site and did not find any brass. Where else should I look? Thanks.

Cheers,
Jason
 
Posts: 98 | Location: Plano, TX | Registered: 16 November 2002Reply With Quote
One of Us
posted Hide Post
http://www.cpcartridge.com/7mmS&H-P.htm they have loaded custom ammo. Elmer.
 
Posts: 158 | Registered: 11 April 2004Reply With Quote
one of us
posted Hide Post
Make them out of 7mm RM's. They will fit the chamber better anyway then.
 
Posts: 5543 | Registered: 09 December 2002Reply With Quote
one of us
posted Hide Post
Does anyone sell the raw brass?
 
Posts: 98 | Location: Plano, TX | Registered: 16 November 2002Reply With Quote
one of us
Picture of fredj338
posted Hide Post
Midway shows it in their catalog, 33.50/20. Also keep an eye on e-bay. I see stuff on there all of the time including some Norma 7x61 a few months ago.
 
Posts: 7752 | Location: kalif.,usa | Registered: 08 March 2001Reply With Quote
one of us
posted Hide Post
Be careful when loading for this caliber. The original factory ammo and rifles were freebored. Loading data for the freebored version is too hot for a standard throat.
 
Posts: 305 | Location: Indian Territory | Registered: 21 April 2003Reply With Quote
one of us
posted Hide Post
Brass for the cartridge may be formed from 7mm Rem, 300 Win, .338 Win, or .300 H&H brass with form dies from any of the big die makers and or fire forming.
 
Posts: 9647 | Location: Yankeetown, FL | Registered: 31 August 2002Reply With Quote
  Powered by Social Strata  
 


Copyright December 1997-2023 Accuratereloading.com


Visit our on-line store for AR Memorabilia