THE ACCURATERELOADING.COM FORUMS


Moderators: Mark
Go
New
Find
Notify
Tools
Reply
  
Load Data for 450 BPE
 Login/Join
 
Moderator
posted
Can someone give me the original load details for this caliber, ie weight of bullet, grains of black powder used, velocity. This is a 3-1/4" case.
A friend has such a rifle and wants to load for it but I have no answers for him. The markings on the gun say 4 drams powder but nothing else! What is the conversion for drams to grains? Any help appreciated!

[This message has been edited by John S (edited 02-20-2002).]

 
Posts: 1148 | Location: The Hunting Fields | Registered: 22 May 2002Reply With Quote
one of us
Picture of ricciardelli
posted Hide Post
A conversion table can be found on my pages in Table #3.

------------------
http://stevespages.com/page8.htm

 
Posts: 3282 | Location: Saint Marie, Montana | Registered: 22 May 2002Reply With Quote
Moderator
posted Hide Post
Thanks! I also did some reading last night and came up with data, courtesy of "Pondoro" Taylor in his classic book about cartridges.
 
Posts: 1148 | Location: The Hunting Fields | Registered: 22 May 2002Reply With Quote
one of us
Picture of Bill/Oregon
posted Hide Post
John: Tell your friend to find a copy of Ross Seyfried's very instructive article on the .450 BPE in the July 2000 issue of Rifle magazine, issue No. 190.
For what it is worth, I just had a Ruger No. 1 .458 reamed to .450 BPE/NE 3.25. Using Federal 215 primer, Bertram case, 120 grains G-O FFg under a Wonderwad and veggie wad and capped with a 480-grain cast lead bullet, I got 1396 fps out of that short 24-inch barrel. Very pleasant load to shoot, too.
 
Posts: 16669 | Location: Las Cruces, NM | Registered: 03 June 2000Reply With Quote
  Powered by Social Strata  
 


Copyright December 1997-2023 Accuratereloading.com


Visit our on-line store for AR Memorabilia