THE ACCURATERELOADING.COM FORUMS


Moderators: Mark
Go
New
Find
Notify
Tools
Reply
  
need 7TCU loads
 Login/Join
 
one of us
posted
Need some 7TCU loads for a 10" contender.
Thanks

[ 03-30-2003, 20:57: Message edited by: handcanon ]
 
Posts: 58 | Registered: 21 March 2003Reply With Quote
one of us
posted Hide Post
handcannon
From the Hornady Book they show IMR 4895 as giving top velocity with all bullets in the 10" bbl.

bullet weight Start load Max load
100 26.7 30.7
120 25.4 30.3
139 25.3 29.2
154 24.0 28.3

When I had my 7mm TCU, 14" I used IMR 3031, just because I had a lot of it around.
 
Posts: 16134 | Location: Texas | Registered: 06 April 2002Reply With Quote
one of us
Picture of ricciardelli
posted Hide Post
 
Posts: 3282 | Location: Saint Marie, Montana | Registered: 22 May 2002Reply With Quote
one of us
posted Hide Post
I like days like this! [Big Grin] [Big Grin] [Big Grin]
 -
Good day
I shoot 28grs IMR3031
28.2 is Maximum in Hornady manual
Hornady 120gr SP
Winchester Small Rifle Primer

If this pic shows up it is the BEST I've ever done with it. I was having a better than average day. I can consistently do a little over an inch at 100yds but I know this gun and load is capable of doing better than I can anyday. This group proves it. [Big Grin]
Mike
 
Posts: 257 | Location: Canada | Registered: 29 March 2001Reply With Quote
  Powered by Social Strata  
 


Copyright December 1997-2023 Accuratereloading.com


Visit our on-line store for AR Memorabilia