THE ACCURATERELOADING.COM FORUMS


Moderators: Mark
Go
New
Find
Notify
Tools
Reply
  
375 H&H brass
 Login/Join
 
One of Us
posted
I have been trying for 6 or 7 months to get some Remington brass for a 375 H&H and can't find any. Cabela's has reordered it time and time again. Hornady is available and on sale, but I have read some bad reviews. Any ideas?
 
Posts: 1205 | Registered: 14 June 2010Reply With Quote
One of Us
Picture of dpcd
posted Hide Post
I use Hornady brass for most everything.
 
Posts: 17353 | Location: USA | Registered: 02 August 2009Reply With Quote
One of Us
posted Hide Post
I think you will find both Remington and Winchester are focusing all their manufacturing on loaded ammo, so reloading components will not be available for some time.
I have been looking for 375H&H brass for 2 years, Norma is available, but I think it is too soft for reloading.
The Hornady brass I have in 458 Lott, 416 Rigby and 500NE all are performing well, no complaints from me.

Cheers.
tu2
 
Posts: 683 | Location: N E Victoria, Australia. | Registered: 26 February 2009Reply With Quote
One of Us
Picture of BNagel
posted Hide Post
I have Hornady brass in 7x64 Brenneke, .416 Rigby, .300 H&H and (waiting on a batch from Midway) .280 Remington. In each case, no pun intended, I have had to chamfer the fool out of new brass to get it to chamber (after touching up the neck in the depriming die). Once fire-formed, no troubles. I do NOT "push envelopes", FWIW.


_______________________


 
Posts: 4889 | Location: Bryan, Texas | Registered: 12 January 2005Reply With Quote
One of Us
Picture of Grumulkin
posted Hide Post
quote:
Originally posted by Bama15:
I have been trying for 6 or 7 months to get some Remington brass for a 375 H&H and can't find any. Cabela's has reordered it time and time again. Hornady is available and on sale, but I have read some bad reviews. Any ideas?


I wouldn't be afraid to use Hornady brass.

Brass tends to stretch a lot due to cartridge design in the 375 H&H Magnum. For this reason, I've found it more cost effective (unless I get a really good deal) to use Norma brass for it. Norma brass is more durable than Remington brass.
 
Posts: 2911 | Location: Ohio, U.S.A. | Registered: 31 March 2006Reply With Quote
One of Us
Picture of BNagel
posted Hide Post
quote:
.Brass tends to stretch a lot due to cartridge design in the 375 H&H Magnum. For this reason, I've found it more cost effective (unless I get a really good deal) to use Norma brass for it. Norma brass is more durable than Remington brass.


Agreed. Remington H&H brass fireformed to .375 Wby and PFL sized thereafter lasted for far less reloads than other offerings. Case head separations for my rechambered Brno. I originally picked the Rem brass because the factory load (brass) was longest.


_______________________


 
Posts: 4889 | Location: Bryan, Texas | Registered: 12 January 2005Reply With Quote
one of us
posted Hide Post
Bama15, PM sent.
 
Posts: 670 | Location: Dover-Foxcroft, ME | Registered: 25 May 2002Reply With Quote
One of Us
Picture of dpcd
posted Hide Post
Use what you can get.
 
Posts: 17353 | Location: USA | Registered: 02 August 2009Reply With Quote
One of Us
posted Hide Post
I did get one box of Hornady that was too soft
 
Posts: 1111 | Location: oregon | Registered: 20 February 2009Reply With Quote
One of Us
posted Hide Post
Just curious here... everybody seems to want to overlook the Prvi brass... the price is pretty good, it's got good availability (Powder Valley lists it in stock as of a few minutes ago) and if my experience with it in 9.3x62 is an indicator, it is very good quality.


A good job is sometimes just a series of expertly fixed fark-ups.
Let's see.... is it 20 years experience or is it 1 years experience 20 times?
And I will have you know that I am not an old fart. I am a curmudgeon. A curmudgeon is an old fart with an extensive vocabulary and a really bad attitude.
 
Posts: 324 | Location: Too far north and 50 years too late | Registered: 02 February 2015Reply With Quote
One of Us
posted Hide Post
If you can find Norma brass, buy and use it. It's been great for my .375 H&H reloads. Typically I find Norma some of the most consistent brass within the same batch. Probably different in the USA but my first batches of brass were from factory ammo as here in NZ at the time there was little difference in cost between new, unused brass and factory ammo.


Hunting.... it's not everything, it's the only thing.
 
Posts: 2101 | Location: New Zealand's North Island | Registered: 13 November 2014Reply With Quote
one of us
Picture of Jiri
posted Hide Post
30.06king:

You are true. I have about 150 Norma cases for 375 H&H and that is all I will ever need in my life.

For driven game hunting etc. (with high probability of loosing cases), I use Federal and other brand cases I have collected.

Jiri
 
Posts: 2121 | Location: Czech Republic | Registered: 22 May 2002Reply With Quote
One of Us
Picture of moved2ski
posted Hide Post
My 375 h&h hornaday brass had case head seporation on the third loading. Same load with Norma have lasted 9 loadings so far. I do have a long chamber and they do require trimming after the third loading.
 
Posts: 51 | Location: Las Vegas via Nebraska | Registered: 19 October 2005Reply With Quote
One of Us
Picture of BNagel
posted Hide Post
quote:
Originally posted by moved2ski:
My 375 h&h Hornady brass had case head separation on the third loading. Same load with Norma have lasted 9 loadings so far. I do have a long chamber and they do require trimming after the third loading.


Three?!! Do you PFL resize? what load? That is severe.


_______________________


 
Posts: 4889 | Location: Bryan, Texas | Registered: 12 January 2005Reply With Quote
one of us
posted Hide Post
I have had great luck with the Privi brass. I kept track of one batch that lasted 8 reloads. Accuracy was also excellent. I got it from Graf & Sons. I have also used the Privi 9.3 x 62 brass with good results.
 
Posts: 781 | Registered: 03 January 2004Reply With Quote
one of us
Picture of Jiri
posted Hide Post
AT:

Some of my Norma brass have been fired about 6 times. After about 3 firings, I started to trim. Now I "trim" it each time, it will or it will not cut anything, just put to trimmer and try. I use Forster dies for Full Lenght sizing and bullet seating and Lee factory Crimp die for crimping. After 6 firings, sizing, cleaning and polishing, you can hardly say if it is brand new or used. Primer pockets still tight etc.

Jiri
 
Posts: 2121 | Location: Czech Republic | Registered: 22 May 2002Reply With Quote
  Powered by Social Strata  
 


Copyright December 1997-2023 Accuratereloading.com


Visit our on-line store for AR Memorabilia