THE ACCURATERELOADING.COM FORUMS


Moderators: Mark
Go
New
Find
Notify
Tools
Reply
  
Drill Bit size for Stoney Point tool
 Login/Join
 
jb177
one of us
posted
What size drill bit is needed for the 5/16-36 tap? I need to make up some more cases.
 
Posts: 579 | Registered: 05 January 2003Reply With Quote
hivelosity
one of us
Picture of hivelosity
posted Hide Post
9/32"
 
Posts: 2134 | Location: Ohio | Registered: 26 June 2000Reply With Quote
OldGuy
one of us
posted Hide Post
I use an "I"


If a day goes by when you don't learn something - it was a Total Loss!
 
Posts: 324 | Location: SE Wyoming | Registered: 27 January 2004Reply With Quote
muck
one of us
posted Hide Post
The I's have it

muck
 
Posts: 1052 | Location: Southern OHIO USA | Registered: 17 November 2001Reply With Quote
pdpdad
One of Us
Picture of pdpdad
posted Hide Post
Proper size is .282-.286 diameter.
Best fit is 9/32 at .2812 or "K" at .2811 or
7.2mm at .2835.
I=.2720 not a problem in a soft metal.
Pat
 
Posts: 48 | Location: Central Indiana | Registered: 16 August 2007Reply With Quote
  Powered by Social Strata  
 


Copyright December 1997-2023 Accuratereloading.com


Visit our on-line store for AR Memorabilia