THE ACCURATERELOADING.COM FORUMS


Moderators: Mark
Go
New
Find
Notify
Tools
Reply
  
375 H&H 300g solid load
 Login/Join
 
One of Us
posted
Anbody have a recipe for woodleigh,s 300 g hydro solids in a 375H&H,i have plenty of AR2209( H4350) powder to burn
 
Posts: 32 | Location: australia | Registered: 28 June 2012Reply With Quote
One of Us
posted Hide Post
Winchester cases, Fed 215 primer, 79 grains H-4350, 2,530 fps. 23 1/2" barrel.

465H&H
 
Posts: 5686 | Location: Nampa, Idaho | Registered: 10 February 2005Reply With Quote
One of Us
posted Hide Post
Email Woodleigh or use the same as for normal bullets but drop 10% and work up due to the change of components.


The guns I have used Hydro's in end up using the same powder charge as normal bullets, give or take a few grains.

.


Previously 500N with many thousands of posts !
 
Posts: 1815 | Location: Australia | Registered: 16 January 2012Reply With Quote
One of Us
posted Hide Post
H4350 is my go-to powder for the 375 H&H with any bullet. I weigh my charges and when I chorno the loads, I get single digit extreme spread for 3 shots.
 
Posts: 154 | Location: Texas | Registered: 05 January 2008Reply With Quote
One of Us
posted Hide Post
Thanks for the help i will get to it & roll some up
 
Posts: 32 | Location: australia | Registered: 28 June 2012Reply With Quote
  Powered by Social Strata  
 


Copyright December 1997-2023 Accuratereloading.com


Visit our on-line store for AR Memorabilia