THE ACCURATERELOADING.COM FORUMS


Moderators: Mark
Go
New
Find
Notify
Tools
Reply
  
Question regarding .308 brass
 Login/Join
 
One of Us
Picture of RHK
posted
I have some .308 brass a buddy sent me from other parts, and I am unfamiliar with it...I have two questions for anyone that may have experience with this brand of brass:

1) I am curious where it comes from...the marking looks like it may be Russian to me - but I am not sure?

2) Is this brass reloadable? I am working up some hunting rounds and my buddy sent me boat loads of this brass, anyone ever reload it and have any experiences with it...

Thanks for any info!

<a href="http://s115.photobucket


"Everybody told me you can't far on $37.00 and and a jap guitar" ~ S.E.

"Turn me loose, set me free, somewhere in the middle of Montana." ~ M.H.


Wild Bob
 
Posts: 73 | Location: North East Montana | Registered: 14 October 2008Reply With Quote
One of Us
Picture of RHK
posted Hide Post
Sorry, let me try this again...I think I copied the wrong code to post the picture...



"Everybody told me you can't far on $37.00 and and a jap guitar" ~ S.E.

"Turn me loose, set me free, somewhere in the middle of Montana." ~ M.H.


Wild Bob
 
Posts: 73 | Location: North East Montana | Registered: 14 October 2008Reply With Quote
one of us
posted Hide Post
i've never seen that, but as long as it is brass and not berdan primed, you should be able to load it.
 
Posts: 51246 | Location: Chinook, Montana | Registered: 01 January 2004Reply With Quote
One of Us
Picture of bartsche
posted Hide Post
EekerCould be Bosnian, Serbian or another of the old Yugoslaian contries. Can go under many names such as PRVI, Hansen or others. popcorn
All I have seen and used is boxer primed and I have found nothing wrong with it and that was in at least 4 calibers. beerroger


Old age is a high price to pay for maturity!!! Some never pay and some pay and never reap the reward. Wisdom comes with age! Sometimes age comes alone..
 
Posts: 10226 | Location: Temple City CA | Registered: 29 April 2003Reply With Quote
one of us
posted Hide Post
Looks like Prvi Partizan Brass made in Serbia.

It is boxer primed and fully reloadable.

Rojelio
 
Posts: 495 | Location: South Texas | Registered: 13 November 2003Reply With Quote
One of Us
Picture of Mike_Dettorre
posted Hide Post
I would resize it and decap it and weigh some of it and then compare that weight to some of your other decaped brass to dtermine if it is extra thick or not...to make sure you don't have any internal volume concerns


Mike

Legistine actu quod scripsi?

Never under estimate the internet community's ability to reply to your post with their personal rant about their tangentially related, single occurrence issue.




What I have learned on AR, since 2001:
1. The proper answer to: Where is the best place in town to get a steak dinner? is…You should go to Mel's Diner and get the fried chicken.
2. Big game animals can tell the difference between .015 of an inch in diameter, 15 grains of bullet weight, and 150 fps.
3. There is a difference in the performance of two identical projectiles launched at the same velocity if they came from different cartridges.
4. While a double rifle is the perfect DGR, every 375HH bolt gun needs to be modified to carry at least 5 down.
5. While a floor plate and detachable box magazine both use a mechanical latch, only the floor plate latch is reliable. Disregard the fact that every modern military rifle uses a detachable box magazine.
6. The Remington 700 is unreliable regardless of the fact it is the basis of the USMC M40 sniper rifle for 40+ years with no changes to the receiver or extractor and is the choice of more military and law enforcement sniper units than any other rifle.
7. PF actions are not suitable for a DGR and it is irrelevant that the M1, M14, M16, & AK47 which were designed for hunting men that can shoot back are all PF actions.
8. 95 deg F in Africa is different than 95 deg F in TX or CA and that is why you must worry about ammunition temperature in Africa (even though most safaris take place in winter) but not in TX or in CA.
9. The size of a ding in a gun's finish doesn't matter, what matters is whether it’s a safe ding or not.
10. 1 in a row is a trend, 2 in a row is statistically significant, and 3 in a row is an irrefutable fact.
11. Never buy a WSM or RCM cartridge for a safari rifle or your go to rifle in the USA because if they lose your ammo you can't find replacement ammo but don't worry 280 Rem, 338-06, 35 Whelen, and all Weatherby cartridges abound in Africa and back country stores.
12. A well hit animal can run 75 yds. in the open and suddenly drop with no initial blood trail, but the one I shot from 200 yds. away that ran 10 yds. and disappeared into a thicket and was not found was lost because the bullet penciled thru. I am 100% certain of this even though I have no physical evidence.
13. A 300 Win Mag is a 500 yard elk cartridge but a 308 Win is not a 300 yard elk cartridge even though the same bullet is travelling at the same velocity at those respective distances.
 
Posts: 10181 | Location: Loving retirement in Boise, ID | Registered: 16 December 2003Reply With Quote
One of Us
Picture of vapodog
posted Hide Post
quote:
Originally posted by Mike_Dettorre:
I would resize it and decap it

before you do that look into the empty case with a flashlight and make sure it only has one flash hole in the center of the case. If there are two or three then you can't reload it! Attempts to do so will ruin your decapping punch.

Like the others here I'd bet it's reloadable.


///////////////////////////////////////////////////////////////////////////
"Socialism is a philosophy of failure, the creed of ignorance, and the gospel of envy, its inherent virtue is the equal sharing of misery."
Winston Churchill
 
Posts: 28849 | Location: western Nebraska | Registered: 27 May 2003Reply With Quote
One of Us
posted Hide Post
That is the headstamp of Prvi Partisan AKA PPU.

They have a web site. They once produced some of the Hanson line of ammo.
I have seen milsurp 8X57 with the nny headstamp that was berdan primed. All the commercially packaged ammo I has seen in the US has been boxer primed. That includes 8X57, 6.5X55, 7X57, .303 British and 6.5 Carcano.
 
Posts: 13978 | Location: http://www.tarawaontheweb.org/tarawa2.jpg | Registered: 03 December 2008Reply With Quote
One of Us
Picture of RHK
posted Hide Post
Thanks for the great info, I appreciate it. I didn't know how to tell the difference between berdan primed and box primed.

Also that is a great tip on comparing the weight...I had not thought of that, thank you Mike.


"Everybody told me you can't far on $37.00 and and a jap guitar" ~ S.E.

"Turn me loose, set me free, somewhere in the middle of Montana." ~ M.H.


Wild Bob
 
Posts: 73 | Location: North East Montana | Registered: 14 October 2008Reply With Quote
One of Us
Picture of Bob from down under
posted Hide Post
We have that kind of brass in Australia.
Its boxer primed. The case prep takes forever.
I've picked some up at the range. It's not Lapua buts its OK to use


Regards,
Bob.
 
Posts: 480 | Location: Australia | Registered: 15 August 2007Reply With Quote
one of us
posted Hide Post
A friend who I load for dropped off some .270 brass with me a few weeks ago. Among the W-W stuff there were four or five rounds of Prvi Partisan brass. The PP brass had a slightly larger head (or different rim cut), enough so that it would not easily enter a Lee primer tool shellholder. I'm sure there is nothing wrong with the brass, but dimensionally you may find some challenges reloading it.
 
Posts: 13274 | Location: Henly, TX, USA | Registered: 04 April 2001Reply With Quote
One of Us
posted Hide Post
RHK ; May I impose upon you to post another picture of a couple of pieces of that brass

in particular the head stamp it's self . I would like to see a number more

clearly if that's possible . Thank You . thumb
 
Posts: 4485 | Location: Planet Earth | Registered: 17 October 2008Reply With Quote
  Powered by Social Strata  
 


Copyright December 1997-2023 Accuratereloading.com


Visit our on-line store for AR Memorabilia