for 7mmWSM and 300WSM to determine if running the 7mm through my 300 dies will result in a case I can use in my 300. Anybody know of a website where I can see these drawings? Thanks.

Will chamber drawings work?

Try here

http://www.clymertool.com/cgi-bin/reamer.cgi?cmd=CMD_START&gunID=2&reamerID=7

The Reloading bench has cartridge drawings but he is off line until December for updating

I see there is a difference in the shoulder length of 50-some thousandths from one to the other. No doubt to keep a 7mm from being chambered in a 300.

Well, I have 69 7mmWSM cases to give away to the first one to PM me. I have 48 nickel-plated ones and 21 brass ones, picked up today at the NRA shooting range north of Reno, NV. Is that place ever a dream come true!! 600- and 1000-yard ranges with pits; almost 40 hard-mounted benches under cover; gongs at 300, 400, 500, 600, 700 and 953 yards (w-a-y up on the hill); ear protection and spotting scopes to rent all day for almost nothing; open on Monday holidays as well as weekends beginning Friday mornings, and several other ranges I never saw. Nothing like that in northern Virginia from where I came before moving here.

I work every day, including alot of Saturdays. The Post Office isn't open on Saturday, so it could be a while before I get them to the lucky PMer. Please be patient. The cases will be sent to you at no charge-- I'll pay everything. I just don't want to throw them away when someone else may want that caliber and not want to sheel out 20-some bucks a bag to buy them.