THE ACCURATERELOADING.COM FORUMS


Moderators: Mark
Go
New
Find
Notify
Tools
Reply
  
Looking for a 300WM load.........
 Login/Join
 
one of us
posted
I am looking for your High/Low loads for the .....

200gr Accubond
220gr SMK's
240gr SMK's

using

4350
7828
H1000


Please give me the accuracy and velocity of your High end/Low end loads.........No others please, as these are the only powders/bullets I am going to experiment with.........
thx
jordan


You only live ONCE!!!!!!!!!! So LIVE it UP!!!!!!!!
 
Posts: 295 | Location: houston, TX USA | Registered: 10 January 2002Reply With Quote
one of us
posted Hide Post
Nobody???????? Nothing?????????? Throw me some Min/Max/Pet loads guys.........


You only live ONCE!!!!!!!!!! So LIVE it UP!!!!!!!!
 
Posts: 295 | Location: houston, TX USA | Registered: 10 January 2002Reply With Quote
One of Us
Picture of woods
posted Hide Post
Hey captjordan

My best load with the 200 gr Accubond and H1000 worked out to be 78.7gr for a velocity around 2900 fps. Don't see the need to shoot heavier than that.

chain has been looking for a 300 win mag load also

https://forums.accuratereloading.com/eve/forums/a/tpc/f/2511043/m/656105145


____________________________________
There are those who would misteach us that to stick in a rut is consistency - and a virtue, and that to climb out of the rut is inconsistency - and a vice.
- Mark Twain |

Chinese Proverb: When someone shares something of value with you and you benefit from it, you have a moral obligation to share it with others.

___________________________________
 
Posts: 2750 | Location: Houston, Tx | Registered: 17 January 2005Reply With Quote
one of us
posted Hide Post
I have had good luck with 200 Accubonds but my loads probably won't help you much. I have been cursed with a 22" barrel so my velocities are somewhat lower than one would want out of a 300 win. Getting good luck with RL 22 though just don't have the speed with me now. I think I was near 2850, for near the max load. If I stay 1 or 2 grains below max my rifle will almost shoot on hole groups with H-1000 Rl-22 and IMR 4831 and 200 gr Accubonds


Windage and elevation, Mrs. Langdon, windage and elevation...
 
Posts: 944 | Location: michigan | Registered: 16 December 2004Reply With Quote
one of us
posted Hide Post
Loading up today........and will hit the range for the next four days..........LYK what the results are with my different loads.

thx for the help guys.


You only live ONCE!!!!!!!!!! So LIVE it UP!!!!!!!!
 
Posts: 295 | Location: houston, TX USA | Registered: 10 January 2002Reply With Quote
  Powered by Social Strata  
 


Copyright December 1997-2023 Accuratereloading.com


Visit our on-line store for AR Memorabilia