Go | New | Find | Notify | Tools | Reply |
one of us |
What powders give the best velocities with 180's in the '06 ??? Also what are your top velocities? Have you found your best accuracy with max loads or at lower levels ?? Thanks | ||
|
one of us |
I get a measured ~2700 fps with 60 grains of Reloder 22 under a Nosler 180 grain Ballistic Tip. For comparison out of the same rifle, with a 22" barrel, I get ~2775 fps using the Hornady 180 grain Light Magnum loading. BTW The Hornady loads have a stated velocity of 2880 on the box. | |||
|
One of Us |
I shoot 180 grain Sierra Spitzers at 2725 fps off 56.5 grains of IMR 4350 using a Remington 9 1/2 primer. Bullets seated 0.020" off the lands (3.758" Sinclair comparator reading). It's a lightly compressed load if I piur the powder right in, but I use a ling drop tube, and the powder barely rattles when I shake a loaded round. I don't do a lot of accuracy assessment (and what I get with my rifle is all but irrelevant for yours), but I have shot 3" groups prone at 300 yards. Group size and velocity spread are considerably greater at 57 and 57.5 grains. It's kind of strange, but the average velocity (10 shots each, same day, conditions) doesn't go up with a grain more powder. I'm happy with this load. H. C. | |||
|
one of us |
My 180 grain load: 1)180 grain Hornady S.P. 2)R-P case/ 9 1/2M primer 3)IMR 4831 57.0 grains 4)COL: 3.26" 5)Vel: 2775fps The rifle is a FN Mauser with 24" tube. | |||
|
One of Us |
54.5 grns of W760, 180 grn interlock 2700+ fs from a 22" tube 1 1/4" moa and much better SD than 4350. At least thats how it works in mine. Start low and work up, always.. | |||
|
one of us |
My favorite load does 2740 out of a 22" barrel.V.V.N-560/61.3gr/180grSST/CCI200/Federal case.That's book Max. | |||
|
one of us |
180 gr. Speer Hot Cor Spitzer 60.0 grs. Winchester WXR F-C gold medal case CCI BR-2 primer ~ 2713 fps avg./22" barrel M70 *reduce 5% and work up slow* | |||
|
Powered by Social Strata |
Please Wait. Your request is being processed... |
Visit our on-line store for AR Memorabilia