THE ACCURATERELOADING.COM FORUMS


Moderators: Mark
Go
New
Find
Notify
Tools
Reply
  
Chamfer Tool for 375RUM
 Login/Join
 
<Johnny B>
posted
MY Lee chamfering tool is not large enought to fit over the OD of the 375RUM case. Do you know of a tool that will work on this case?
 
Reply With Quote
one of us
posted Hide Post
C&H makes one big enough

http://www.ch4d.com/

Standard: Fits 17 to 45 calibers
Magnum: Fits 45 to 60 caliber
 
Posts: 77 | Location: W. Branch MI USA | Registered: 22 April 2002Reply With Quote
one of us
posted Hide Post
Not trying to be a smart alec but once you get a better chamfering tool you'll wonder why you ever used the lee. (at least if it's the little lightweight tool that I have that lee made--I think it cost about $2.00 and that's all it was worth.)
 
Posts: 2002 | Location: central wi | Registered: 13 September 2002Reply With Quote
One of Us
posted Hide Post
CH4 as someone else metioned makes one I have one that works for my .585 cases so it will work for a .375 Rum.

The rcbs one also works for rounds up to .458 I think.
 
Posts: 7505 | Location: Australia | Registered: 22 May 2002Reply With Quote
one of us
posted Hide Post
JohnnyB
Kraky is right...the lee is a piece of poop!
I have 2?? Don't even know where the second on came from.

The RCBS works perfectly.

What is your 375 Ultra in?
Do you like it?

Sure love mine...Okay I think about it even when I should be working. [Embarrassed] [Big Grin]

[Big Grin] KABOOM! I love it! [Big Grin]

Jamie
 
Posts: 322 | Location: B.C. Canada | Registered: 31 March 2003Reply With Quote
one of us
posted Hide Post
Lyman makes an extra large also,up to 60 cal.
 
Posts: 236 | Location: Oregon | Registered: 16 October 2001Reply With Quote
<Johnny B>
posted
X-man...I have a Rem. 700BDL deluxe. It is on the light side, 7# and the trigger needs to be re-worked to a 3.25# pull or so. Other than that, I really like it.

Thanks for the replys guy's, I have some good choises to make on the chamfer tool.
 
Reply With Quote
one of us
Picture of POP
posted Hide Post
Get the lyman VLD...The best!
 
Posts: 3865 | Location: Cheyenne, WYOMING, USA | Registered: 13 June 2000Reply With Quote
<Johnny B>
posted
POP....The Lyman VLD, now that will only chamfer the I.D. of the neck; Is that correct? I need a tool to, I guess it would be called Deburr, not chamfer, the O.D. of the case. So my real question is what tool do you recommend to "deburr" the O.D. of the 375 RUM? A tool like the RCBS (that X-man recommended)will do both operations (I.D. and O.D.). Am I on the right track here or do you have a tool that is better to do the O.D.?
 
Reply With Quote
  Powered by Social Strata  
 


Copyright December 1997-2023 Accuratereloading.com


Visit our on-line store for AR Memorabilia