Wanted!!! Loads for the 375 H&H and the 416 Rigby

Will be shooting North Fork 270 (2700 fps) and 300 Gr softs and 300 Gr Cup Points solids(2500 FPS)in the 375 H&H.

Will be shooting North Fork400 Gr softs and Cup Point solids in the 416 Rigby. (2400 fps)

Thanks for your input in advance.

416 Rigby

370 grain North Fork
104 grains H-4831sc
Norma brass
Fed#215 primer
chronographed velocity = 2464fps; SD = 9
gives me 1 hole groups @ 50yds

You might also want to consider working up a load for a conventional solid or flat-nosed solid. I use these on the small critters, to minamize cape damage. The Cup Point solids might work too - not sure, as I haven't shot anyting small with them.

300 gr North Fork win. cases fed 215 ti gr RX 15 got over 2600 fps from CZ. It willshoot 3 softs,3 solids and cup point solids into one ragged hole at 100 yards. WHEN I DO MY PART

I have shot a lot of game with a .375 and 270 NF. I load 72 gr RL15 and a 270 NF and it goes 2770 fps in mine. I load 105 gr of H4831SC and the 370 NF in the .416 for 2530 fps. This is a great load in my Ruger RSM and I can shoot it for a year and never shoot a group over an inch at 100 yards. I have shot groups as small as .260 with this load and only a 1.5-6x Leupold.

Thanks Jstevens.

That was what I was looking for. I want A little slower on the 416 Rigby, but with the 400 grainers that might be about right.

In my pre 64 375 I use 69 gr RL 15 w/300 NF with no pressure sign up to 70.5. Start low and work up as usual.