THE ACCURATERELOADING.COM FORUMS


Moderators: Mark
Go
New
Find
Notify
Tools
Reply
  
300 WSM 168TSX and 180 TSX
 Login/Join
 
One of Us
posted
looking for load info for my Browning 300 WSM with the 168 and 180TSX.... I like using H4350 powder in the calibre but am open..

anyone want to share any loads?

thanks
 
Posts: 186 | Location: langley,BC | Registered: 07 February 2005Reply With Quote
One of Us
posted Hide Post
A stiff load of H34831SC under the 168gr TSX in my friends Abolt gets him just over 3100fps, and very good accuracy. We got more speed and accuracy with 4831 than with 4350, in his rifle.

We seat the bullets to fit the magazine.
 
Posts: 620 | Location: Colorado | Registered: 04 January 2005Reply With Quote
one of us
posted Hide Post
Ramshot Hunter is top performer in all three of the 300WSM I load for. Excellent accuracy and velocity, cheap too.
 
Posts: 1205 | Location: Minnesota | Registered: 07 February 2004Reply With Quote
one of us
posted Hide Post
You are on the right track wanting to use H 4350 in the 300 WSM. It is the powder that works best in my Remington 700 XCR chambered in 300 WSM.

My rifle shoots the 168 TSX best with a charge of 66 grains of H 4350 using Winchester cases and Fed 215M primers. The velocity is 3100 fps and the average group is 0.70 inches.

I have not shot any 180 TSX bullets in my 300 WSM, but 65 grains of H 4350 behind the 180 Nosler Partition averages 2975 fps and 0.75 inches for a three shot group.

Hope this helps.


R Flowers
 
Posts: 1220 | Location: Hanford, CA, USA | Registered: 12 November 2000Reply With Quote
  Powered by Social Strata  
 


Copyright December 1997-2023 Accuratereloading.com


Visit our on-line store for AR Memorabilia