Would someone Please run this load that has a program. This is the load I load for my stw. 81gr. re25, 160gr. nos. part. 81gr. re25 150nos.bt. I would like to know if I need to back off. It seams to be ok but I sure would like to know to be on the safe side. Thanks. fws

TOTO, Assuming you meant 7mm STW and running your numbers through Quickload, you are 6566 psi over the safe maximum load. Maximum safe load is 65000 your load is 71566. I also assumed you meant Reloader 25 for your powder. Could you please be more specific. Did the cases show any sign of high pressure? Sticky bolt, flattened primers?

Turkeyshooter, I appreciate you taking the time to run this for me . Yes it is STW and yes reloader 25. It has flattened primers, but most of my loads does. I think I will back off to 80gr. Thanks a mil. fws

Just a little helpful information here...

Loading range for 150's:
RL-25 From 75.3 grains to 81.0 grains
Federal 215 Primer

Loading range for 160's:
RL-25 From 71.7 grains to 78.5 grains
Federal 215 Primer